Problem with ceramic resin printing (part detaches from platform)

Hi all,

we are currently trying to print our first parts with ceramic resin. The part is quite small (3 x 8 mm) and we are using the default print settings (with base, supporting constructions).
In all of our tries (4), the base detached from the build platform after 40 to 90 minutes printing.
It seems that either the base of the model drops down or it sticks in the resin tank.
We had a look at the recommended preparations when using ceramic resin and performed these steps accordingly (sand build platform, properly mixing resin in tank and cartrige). We also use a new resin tank for the ceramic resin.

Does anyone have an advice what we might do wrong?

Thanks a lot in advance!

This topic was automatically closed 7 days after the last reply. New replies are no longer allowed.