Grey pro + LT tank HUGE problems

Support & Troubleshooting Form 2
1

Hello,

Im using a new LT tank and new grey pro resin, with really bad results and i dont know what to do.

image
image1441×841 156 KB

photo_2019-05-10_08-48-14
photo_2019-05-10_08-48-141280×720 76.6 KB
photo_2019-05-10_08-48-16
photo_2019-05-10_08-48-16720×1280 73.2 KB
photo_2019-05-10_08-48-17
photo_2019-05-10_08-48-17720×1280 73.4 KB
photo_2019-05-10_08-48-15
photo_2019-05-10_08-48-15720×1280 72.8 KB
photo_2019-05-10_08-48-18
photo_2019-05-10_08-48-18720×1280 88.1 KB
photo_2019-05-10_08-48-14
photo_2019-05-10_08-48-141280×720 76.6 KB

I cant even take it off the platform, its really stick and hardened to the platform. I adjusted the Z and same results, its on 0.6 in this print.
¿could be the optics? I really dont know what to do next.

Thanks

2

Looks very much like an optics issue. You should submit a support ticket to Formlabs, they will walk you through the process of checking for other errors and cleaning your printer’s optical path.