DIY curing oven, need clarification/input on light source

[Dudemeister]

I bought mine on eBay. This is a 5ft. strip of 600 LEDs, and it’s been going now for over a year and half.

Here is the link to the vendor I bought them from:

15ft-600LED Strip

I power the strip with a 12V @ 2A power supply, and it works great.

BTW, here is a link to my original post:

My $25 Curing Station

Here is my $25 curing station. It’s made from 2 Dynaware clear tubs, and a 15ft string of UV LEDs. The large tub is about 7" in diameter and 9" tall. Inside it there a smaller tub, that’s 5" in diameter and 4" tall, and it’s placed upside down as a pedestal for the curing parts. The LED string is one of the “high-density” ones, and it has 600 LEDs (about 3 LEDs/inch), instead of the usual 300 LEDs. The tubs come with air-tight lids, and that helps trap the heat in. And this gets pretty war…