AI Designed Water Blasters

Hey all! We asked the question: What happens when you let AI do all the CAD work? Our R&D Lead Kennedy Liu 3D-printed these water blasters entirely, and he didn’t touch CAD to design them. Watch our video showing them off here!

Kennedy gave Claude its own Python environment and let it model everything. The result: two fully working water blasters, designed in a fraction of the time it would have taken in traditional CAD. Every part is modeled from parametric scripts.

The bodies, printed in Alpha Clear Resin, let you watch the water travel through the internal coiled channel, while both the pump bellows and one-way duckbill valves were printed in Flexible 80A Resin.

Everything you see was printed on Form Studio 1: https://formlabs.com/3d-printers/form-studio-1/

Attached are the STL files for both the large and small blaster, plus a PDF assembly guide with the required materials.

Happy printing!

​

Guide: Specimen_Glass_Print_Assembly_Guide.pdf (8.5 MB)

Large Blaster Direct Download

Small Blaster Direct Download

1 Like

Nice project. One practical thing to check with the Flexible 80A bellows and duckbill valves is cure uniformity: thin flexing features can stiffen if post-cured too long, which may change pump feel and valve sealing. Orienting the STLs so the flexing sections aren’t over-supported usually helps too. I haven’t opened the attached files, so this is just a general suggestion for anyone printing them.

1 Like