Tiny print on Form1+

[NewDealStudiosI]

So after doing the Ant detailed here

Form1+ rocking it

Here is a side by side with our Afina pint. Afina took about 2.5 hours and detail areas of lego man like in the hands are rough. We did the ant on the Afina too but had to slice the body in half, thicken the thin bits and print them separately. That mean creating little holes and pegs on the parts for reassembly. Form1 definitely kicked it’s but, especially on detail. Sorry I don’t have the Afina ant pictures. [image] [image] [image]

and being impressed the thin bits held up I got asked to 3D print a flower pistil, stamen, and ovary. No problem I thought till I got the model from our designer. It is tiny. The whole part is 6x6x4mm with the stamen being 0.6-0.8mm diameter.

the FFF printers we have won’t even accept parts like that. Form1+ printed it perfect and accurate twice. Sorry pics stink but I took them with my iPhone.

[NewDealStudiosI]

Very impressive, still wish the feature size could go smaller as I would have gone even thinner on the stamen. I tried 0.3mm for the smallest once and it didn’t print.