I ordered a Studio1 and I'm Form4L & Form4 owner. Here's why

TL; DR:
1) Alpha resins;
a) rated for prolonged skin-contact
b) appear to require lighter support structures based on some testing in Preform
c)represent a potential cost savings over the 4/4L material options
2) Inexpensive path to ‘open material mode’ that is unreasonably priced on the 4/4L
3) substantial discount on Curev2.0 & Wash2.0 in the bundled option.
4) capability to run Tough1500 and Flexible80A from, which are apparently cross compatible on the 4/4L

My business is a mechanical engineering design services company (all the usual offerings, 3DCAD/3DScnning/3Dprinting-serving customers in any sector that can benefit)

As a Form4 & 4L user, I thought sharing my thought process behind ordering a Studio 1 could help anyone weighing the same choice. Originally, I bought a Form2 back in 2017. It was a mixed bag of experiences, mainly due to material limitations. When Nexa3D’s XiP was introduced, I replaced the Form2 specifically because of the inherent mSLA throughput advantages and to use Loctite photopolymers for end-use parts (3843 is pretty awesome stuff). Unfortunately, Nexa imploded shortly afterward, so I made the choice to return to Formlabs when the 4L was announced in ‘24.
In Q1 of 2025, I also added a Form 4 specifically to avoid interrupting the 4L’ s production runs just to handle “emergency” jobs or risk having to disappoint a customer because the machine was going to be tied-up.

With the announcement of the Studio1, and considering the price point, the question became: “what do you get out of adding one of these to the current line-up?”…

1)Alpha resins: new, inexpensive materials that are suitable for consumer product concept prototyping when skin contact is part of the requirements. Also, considering ClearV5 as an example, it’s not like general purpose resins are “functional” anyway. Why pay 3x the price for non-functional “it’s just a physical model” material options? Lastly, and more importantly: some initial testing in Preform suggests that the supports needed to run the Alpha resins could be substantially more sparse, which directly benefits model aesthetics and post-processing effort.
2) You want how much to run third-party resins on MY machine?? it’s the hardware equivalent of SaaS and, to be very blunt, it’s a strategy that smells just like something straight out of 3D Systems’ or Stratasys’ play book. I’ve always viewed it as a shameless money-grab and immediately dismissed it, on principle alone. Fast forward to now: it seems there’s been change of heart. I can only speculate this is partly due to the “Bambu Lab” disruption of stale paradigms the AM industry has been punching itself in the face with for years, while pretending to be confused and frustrated that “mass adoption!” is somehow not happening; but I digress. I do have use cases where Loctite resins might be a better fit so potentially being able to run them on a low-cost, open material machine is optionality, which is always a good thing.
3) Discounted path for more post processing throughput! The subsequent addition of a Form4 did not include buying a Wash/Cure2.0 bundle. Afterall, the CureL and WashL that were part of the my 4L’s bundle deal were “enough”…except there’s times that “quickie” jobs could benefit. ~$1,700 for the Studio + Form Wash + Form Cure is basically “buy a Wash and a Cure and get a free printer”.
4) Wait: new low-price hobbyist printer can run engineering-grade materials that my “professional” printers can?? I’ve seen some related remarks on the forum related to this. The overlap/blurred-line between “pro” tier with “pro-tier pricing” vs “hobby-tier” at 1/3rd the price…that doesn’t have “1/3rd of the capability”. The new, inexpensive system can run Tough1500v2 and Flexible80A…and Tough1500V2 for the Studio1 has identical mech props, and costs half as much…and it prints only slightly slower due to the Studio1’s lower power output. Honestly, this one irritates me quite a bit. Just like anyone else in the 4/4L ecosystem likely feels, there’s a sour note here. The performance gap isn’t proportionate to the difference in price. But I view this as part of a transitional shift away from the stale thinking of the last 20 years in the AM industry and acknowledgement that “the Bambu way” is the right path. Unfortunately, there’s going to be an “adjustment” period and some of us got pinched.

In any case, hope this “just thinking out loud” is helpful commentary for anyone who might be trying to consider the same decision.

1 Like

I am confident that most Form 4 users more than Form 4L users have felt this in the last couple of days - economically there does not seem to be a very clear reason not to onboard. Formlabs till date has not taken the time to explain or answer any or questions so at this point of time it feels to stay relevant we are compelled to move into a newer system.

Personally for me, it felt like Elisabeth Kübler-Ross’s 5 stages of grief:

Denial - They could not have released a a $699 printer which cannibalizes their $2625-4499 starship printer which is barely 2 years old.

Anger - Why isn’t there a product segmentation? Why are they blurring the lines so much ? Why cannot Form 4 have free Open Material Mode? Why cant we have cheaper consumables and resins? Why cant we use Alpha Resins? Why does the Form 4 flex plate with same build area cost thrice ? etc…

Bargaining - (don’t have enough data for this actually) Only that Form 4 prints engineering resins faster and comes with validated resins profiles

Depression - ( I would not say depression, plain helplessness) What do I do with the Form 4 ? Why do I need keep to paying for the expensive ecosystem? As a business how is it going to affect my model?

Acceptance - Well it is what is , I will probably just buy Studio 1 and figure it out from there, If it works as promised then good for me and if it doesn’t I still have the Form 4.

It feels awful…

Having said so I still a haven’t given up on asking Formlabs about the questions which still bother me even if I chose to onboard to the Studio 1. As a customer I do have a right to know how Form 4 future will play out.

1 Like

In my own thought process, it came down to make the best of the circumstances; “how can I potentially turn this into an opportunity, rather than write it off as a loss?” The bundle with the Wash and the Cure was certainly the most immediate. The other aspects are really just “potential”.

They got your money in the end, exactly what the muddy differentiation intended :sweat_smile::upside_down_face: I’m jesting. All your points make sense, looking forward to hearing your opinion on it once you get it!

2 Likes

Ah yes, the awkward moment when the joke starts sounding less like a joke and more like an accurate summary. :upside_down_face:

Well, just as a general pricing reference point, on the subject “got your money”: $1,000 for a 4L Flexplate that still needs the user to chisel parts free? I don’t feel I’ve been “suckered” nearly as bad with the Studio bundle. Hoping the “re-balancing” of value in their pricing is something we can all look forward to in the future.

1 Like

I went through this too, the biggest question I don’t understand is, why can’t alpha resins work on the form 4? I don’t need the open material license, I just want the lower cost resin for visual prototypes at the cost of some dimensional accuracy and speed if needed. This would encourage more iteration until satisfied to use the premium materials. I’ve heard of an explanation regarding the new ridges and shapes in the release glass to improve speed, ok, I’ll take the half second per layer cost to run $29 / L alpha fast resin, $36 reg alpha resin instead of the min $79 /L resin for form 4.

2 Likes

100%, can’t agree with you more. Although it’s purely speculation, I genuinely feel they’ll have to open the door to running the Alpha resins on the 4/4L, I can’t see any “technical barriers” in the way and I would be completely shocked if they chose not to. I think it would be a really bad look if they didn’t.

1 Like

Can I also please add the flex plate pricing. It really is mind boggling how two flex plates with same build area can have such a huge price difference?

1 Like

Nah the studio sounds like a pain to configure. I got a form 4 so I don’t have to finnick around with the damn thing

The only thing I’m so confused about is the consumables pricing jumping over 60% for the form 4. They’re really leaning into the “professionals only” route

I never understood “open materials mode”

Just get an Elegoo mars for like $300 and go experiment. I paid to be locked into the 98% success rate formlabs ecosystem with amazing materials. Why would I risk my $10,000 machine and its warranty :sob:

I do agree the alpha-fast resins seem cool and cost saving. Their flimsier mechanical tech specs don’t justify abandoning my form 4 just yet.

Once again I hate to be the person doing this -

Does this look like low specs to you in any way? for a price difference of 50%.

Infact I can with confidence tell you all Alpha resins are more ductile, show higher impact energy with marginal drop in HDT and Tensile properties. When compared to Form4 GP resins.

Only major drop is in flexural strength.

Also, Open material mode does not only mean GP resins there are other validated engineering grade resins which need open material mode such as Loctite resins.

2 Likes

Then get a cheaper elegoo bro. no one went into the formlabs ecosystem to save money, we bought in to save time.

You can go play around with a $400 bottle of loctite resin and spend time dialing your printer LOL.

You have not answered one question in our entire conversation of 6 posts with logic, technical proof or an economic stand point.

All you have done is come out and put out your opinion, well this is a community and everybody is entitled to their opinion - so I am going to leave you to it, all the best!

2 Likes

You may want to read this :
Guidelines - Formlabs Community Forum

Let’s all try to make the forum a useful and welcoming place, shall we ?

2 Likes

I have a feeling that the Alpha Date is with the Studio UV cure, but if you would cure the Alpha Black for example with the Black V5 will be the same… just a feeling