# X/Y Calibration

**URL:** <https://forum.formlabs.com/t/x-y-calibration/36889>\
**Category:** Fuse 1/1+\
**Created:** [September 11, 2023, 9:03am UTC](https://forum.formlabs.com/t/x-y-calibration/36889 "2023-09-11T09:03:54Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Andreasemilsson](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/andreasemilsson/32/21283_2.png) [@Andreasemilsson](https://forum.formlabs.com/u/Andreasemilsson)\
**Post date:** [September 11, 2023, 9:03am UTC](https://forum.formlabs.com/t/x-y-calibration/36889/1 "2023-09-11T09:03:54Z")

</div>

Hey everyone.

We just did the X/Y Calibration on our Fuse printers. Both Fuse 1 and Fuse 1+.

I just noticed this line on the website: 5. Tap **Finish**. The **X/Y Scaling** values are applied to the tested material when this printer is selected in PreForm.

Does this mean that the calibration is not applied on current jobs in the printer and only affect new builds in Preform?

---

<div class="post-metadata">

**Author:** ![Jesse\_K](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/jesse_k/32/18872_2.png) [@Jesse\_K](https://forum.formlabs.com/u/Jesse_K)\
**Post date:** [September 11, 2023, 4:23pm UTC](https://forum.formlabs.com/t/x-y-calibration/36889/2 "2023-09-11T16:23:31Z")

</div>

Hi @Andreasemilsson,

The X/Y Scaling calibration values are applied to any print job with that powder type, regardless of whether it was uploaded to the printer before or after the adjustment. I agree that the line you quoted is somewhat confusing. You do not have to reupload your print jobs for the calibration values to be applied.