# X Y calibration, tried heaps, out of options

**URL:** <https://forum.formlabs.com/t/x-y-calibration-tried-heaps-out-of-options/19098>\
**Category:** Form 1/1+\
**Created:** [June 7, 2018, 10:42am UTC](https://forum.formlabs.com/t/x-y-calibration-tried-heaps-out-of-options/19098 "2018-06-07T10:42:45Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![ProtoSpace](https://avatars.discourse-cdn.com/v4/letter/p/ac91a4/32.png) [@ProtoSpace](https://forum.formlabs.com/u/ProtoSpace)\
**Post date:** [June 7, 2018, 10:42am UTC](https://forum.formlabs.com/t/x-y-calibration-tried-heaps-out-of-options/19098/1 "2018-06-07T10:42:46Z")

</div>

Hi.

So we got a formlabs 1+ wich was dropped with resin, so we had to fix a lot of the machine allready.  
New z bed tilt motor. Adjusted the mirrors, wiped everything clean with IPA.  
And most of the time it prints good, but it’s not the right size.  
So i alligned the laser, and started to see if the x and y scale would do anything. But sadly no.

Attatched some pictures of the steps i did.

 ![formlabs](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/8/881fdf878950ce934d77b78f8c4e087d814f0ad6.jpg)

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [June 14, 2018, 10:42am UTC](https://forum.formlabs.com/t/x-y-calibration-tried-heaps-out-of-options/19098/2 "2018-06-14T10:42:58Z")

</div>

This topic was automatically closed 7 days after the last reply. New replies are no longer allowed.