# Wiper motor jamming, resin over spilled outside the tray in automatic refill option biggggg messss!

**URL:** <https://forum.formlabs.com/t/wiper-motor-jamming-resin-over-spilled-outside-the-tray-in-automatic-refill-option-biggggg-messss/9305>\
**Category:** Support & Troubleshooting\
**Created:** [August 17, 2016, 3:04pm UTC](https://forum.formlabs.com/t/wiper-motor-jamming-resin-over-spilled-outside-the-tray-in-automatic-refill-option-biggggg-messss/9305 "2016-08-17T15:04:35Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![ChristopherBarr](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/christopherbarr/32/645_2.png) [@ChristopherBarr](https://forum.formlabs.com/u/ChristopherBarr)\
**Post date:** [August 17, 2016, 3:14pm UTC](https://forum.formlabs.com/t/wiper-motor-jamming-resin-over-spilled-outside-the-tray-in-automatic-refill-option-biggggg-messss/9305/2 "2016-08-17T15:14:24Z")

</div>

start here…

> [@Form2 resin over fill DISASTER!](http://forum.formlabs.com/t/form2-resin-over-fill-disaster/9187):
>
> Been printing for 2 months with 91% success. Yesterday i changed clear resin and tank to a new black resin and new tank. I started a print, and while preparing and heating, i noticed that printer says “unused” under the tank. After heated to 30 degrees, it was stuck on filling tank yet nothing was coming out of the cartridge. i waited 15 minutes, and nothing. I aborted the print and removed cartridge and inspected it. Nothing strange was found. Removed the tank and inspected it, and found not…

---

_[View the full topic](https://forum.formlabs.com/t/wiper-motor-jamming-resin-over-spilled-outside-the-tray-in-automatic-refill-option-biggggg-messss/9305)._
