# Which resin is most durable

**URL:** <https://forum.formlabs.com/t/which-resin-is-most-durable/9311>\
**Category:** Projects & Prints\
**Created:** [August 18, 2016, 4:00pm UTC](https://forum.formlabs.com/t/which-resin-is-most-durable/9311 "2016-08-18T16:00:19Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![Bojidar\_Donchev](https://avatars.discourse-cdn.com/v4/letter/b/2bfe46/32.png) [@Bojidar\_Donchev](https://forum.formlabs.com/u/Bojidar_Donchev)\
**Post date:** [October 28, 2016, 1:14pm UTC](https://forum.formlabs.com/t/which-resin-is-most-durable/9311/6 "2016-10-28T13:14:18Z")

</div>

The best results I’ve got are with mix of Formlabs Clear/Tough cured on Black settings.

Mix of 50/50 is good, but also you can make a 80/20 Tough/Clear for parts that have more load.

See here [A bit of resin alchemy](http://forum.formlabs.com/t/a-bit-of-resin-alchemy/6630/27)

@ChristopherBarr was the guy who test this mix for the first time

read the whole discussion and you will find answers

---

_[View the full topic](https://forum.formlabs.com/t/which-resin-is-most-durable/9311)._