# Which orientation do you think is better for printing on the Form 4?

**URL:** <https://forum.formlabs.com/t/which-orientation-do-you-think-is-better-for-printing-on-the-form-4/47120>\
**Category:** Form 4/B/L\
**Created:** [November 13, 2026, 9:05am UTC](https://forum.formlabs.com/t/which-orientation-do-you-think-is-better-for-printing-on-the-form-4/47120 "2026-11-13T09:05:16Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![charger\_01](https://avatars.discourse-cdn.com/v4/letter/c/f17d59/32.png) [@charger\_01](https://forum.formlabs.com/u/charger_01)\
**Post date:** [November 13, 2026, 9:05am UTC](https://forum.formlabs.com/t/which-orientation-do-you-think-is-better-for-printing-on-the-form-4/47120/1 "2026-11-13T09:05:16Z")

</div>

Hi Formlabs community!

What do you think is the better orientation for printing these parts on the Form 4?

**Orientation 1** , or **Orientation 2** , where the parts are additionally tilted along the Z-axis?

I’d love to hear your thoughts and experiences. Thanks in advance!

 ![Bildschirmfoto 2026-11-13 um 09.58.48](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/9/2/92e7016d2e94b4e52f0f2f90b8746b5902093ba0.jpeg)

 ![Bildschirmfoto 2026-11-13 um 09.58.55](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/c/b/cb2b7cdb0be1d357881681f1d2d8b7ef52d259f7.jpeg)

---

<div class="post-metadata">

**Author:** ![Nihal\_Drotsa](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/nihal_drotsa/32/23399_2.png) [@Nihal\_Drotsa](https://forum.formlabs.com/u/Nihal_Drotsa)\
**Post date:** [November 13, 2026, 9:35am UTC](https://forum.formlabs.com/t/which-orientation-do-you-think-is-better-for-printing-on-the-form-4/47120/2 "2026-11-13T09:35:40Z")

</div>

Formlabs has an article regarding best practices for model orientation - [Model orientation best practices for SLA printing | Formlabs](https://formlabs.com/support/Model-Orientation/) .

I am confident this will answer most of your questions. 😃
