# Whats new in Preform 1.8\_13?

**URL:** <https://forum.formlabs.com/t/whats-new-in-preform-1-8-13/3007>\
**Category:** General Discussion\
**Created:** [December 19, 2014, 9:11am UTC](https://forum.formlabs.com/t/whats-new-in-preform-1-8-13/3007 "2014-12-19T09:11:31Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![KevinHolmes](https://avatars.discourse-cdn.com/v4/letter/k/3ec8ea/32.png) [@KevinHolmes](https://forum.formlabs.com/u/KevinHolmes)\
**Post date:** [December 19, 2014, 9:11am UTC](https://forum.formlabs.com/t/whats-new-in-preform-1-8-13/3007/1 "2014-12-19T09:11:31Z")

</div>

What’s in this release over Preform 1.8?

---

<div class="post-metadata">

**Author:** ![Alex\_Vermeer](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/alex_vermeer/32/2491_2.png) [@Alex\_Vermeer](https://forum.formlabs.com/u/Alex_Vermeer)\
**Post date:** [December 19, 2014, 1:15pm UTC](https://forum.formlabs.com/t/whats-new-in-preform-1-8-13/3007/2 "2014-12-19T13:15:44Z")

</div>

I do know what’s missing in Preform 1.8.13.

If you scroll through each layer to make sure that all parts are supported. After reaching a layer which isn’t supported, you edit the supports and add one to the spot which needs supporting. However, in the new Preform, when accepting the changes, it doesn’t go back to the layer you were on. You have to scroll back to the layer and continue. The last version remembered where you were after editing. Apart from that I haven’t noticed any differences compared to 1.8.

Hopefully someone from Formlabs can enlighten us 🙂

---

<div class="post-metadata">

**Author:** ![CraigBroady](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/craigbroady/32/6106_2.png) [@CraigBroady](https://forum.formlabs.com/u/CraigBroady)\
**Post date:** [December 19, 2014, 3:03pm UTC](https://forum.formlabs.com/t/whats-new-in-preform-1-8-13/3007/3 "2014-12-19T15:03:15Z")

</div>

minor bug fixes is all