# What solvent are people using with Tough resin? **URL:** \ **Category:** General Discussion\ **Created:** [July 25, 2017, 3:50am UTC](https://forum.formlabs.com/t/what-solvent-are-people-using-with-tough-resin/14241 "2017-07-25T03:50:43Z")\ **Posts on this page:** 1\ **Showing post:** 3
**Author:** ![KenCitron](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/kencitron/32/1741_2.png) [@KenCitron](https://forum.formlabs.com/u/KenCitron)\ **Post date:** [July 25, 2017, 6:58pm UTC](https://forum.formlabs.com/t/what-solvent-are-people-using-with-tough-resin/14241/3 "2017-07-25T18:58:21Z")
Check this link out: > [@Replacing Isopropyl Alcohol with Yellow Magic](http://forum.formlabs.com/t/replacing-isopropyl-alcohol-with-yellow-magic/6346): > > Several of us ( @KenCitron, @Donal_O_Donohoe, etc.) have been looking for a replacement for Isopropyl Alcohol. One product that seems to show promise in our early testing is called Yellow Magic by Bradley Systems. If you’d like to test it yourself and post the results, we’ve arranged for free samples to be provided to FormLabs Support Forum users. Contact: Christopher Targosz [ctargosz@bradley-systems.com](mailto:ctargosz@bradley-systems.com) 773-383-8465 [http://www.bradley-systems.com/yellow-magic](http://www.bradley-systems.com/yellow-magic) Three Quick Points Yellow… I use it with the clear resin, you may want to heat it up to get better results. I find that it is easier to take the supports off the part while it is fresh and warm. I don’t seem to be getting the chipping that can be a pain finishing. --- _[View the full topic](https://forum.formlabs.com/t/what-solvent-are-people-using-with-tough-resin/14241)._