# What should my first print be? **URL:** \ **Category:** Projects & Prints\ **Created:** [May 26, 2016, 1:22am UTC](https://forum.formlabs.com/t/what-should-my-first-print-be/8336 "2016-05-26T01:22:10Z")\ **Posts on this page:** 1\ **Showing post:** 12
**Author:** ![gregor616](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/gregor616/32/6239_2.png) [@gregor616](https://forum.formlabs.com/u/gregor616)\ **Post date:** [May 31, 2016, 11:47pm UTC](https://forum.formlabs.com/t/what-should-my-first-print-be/8336/12 "2016-05-31T23:47:13Z")
This is post I used to get my Jar set up. > [@Budget UV Cure Box (Jar?)](http://forum.formlabs.com/t/budget-uv-cure-box-jar/3176): > > So here’s my budget UV curing box (or in this case, Jar) project. Parts required: One roll of Duct tape or similar tape (a mostly-used-up roll would be enough, so at most a dollar or so worth of tape) One suitably sized clear lexan/glass/acrylic container (I bought this one at Bed, Bath & Beyond for $19) One string of near-UV blue 405nm 12V LEDs (I bought this one at a local electronics supply store for $20) One roll of Reynold’s Wrap or other shiny metallic foil (cost would be pennies if I h… --- _[View the full topic](https://forum.formlabs.com/t/what-should-my-first-print-be/8336)._