# Wearable Metronome project **URL:** \ **Category:** Projects & Prints\ **Created:** [October 25, 2014, 5:23pm UTC](https://forum.formlabs.com/t/wearable-metronome-project/2413 "2014-10-25T17:23:41Z")\ **Posts on this page:** 1\ **Page:** 1
**Author:** ![GreggWygonik](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/greggwygonik/32/18109_2.png) [@GreggWygonik](https://forum.formlabs.com/u/GreggWygonik)\ **Post date:** [October 25, 2014, 5:23pm UTC](https://forum.formlabs.com/t/wearable-metronome-project/2413/1 "2014-10-25T17:23:41Z")
Recently I had my first two-week vacation in almost a decade and I decided to put all my tools to use and make an idea real - a wearable metronome based around a MicroView device (a tiny Arduino with OLED display). This included designing a circuit board in Eagle, milling it on my Othermill, designing a case and accessories in Blender, and then printing all the pieces on my Form 1+. Happy to say I got it all done, including lots of iteration and test prints. I was finally able to figure out what I needed to do to get totally reliable prints from my Form 1+ (better straining of the resin between prints, keeping the room at 75-degrees or more, adjusting z-height offset in Preform, etc). So happy with this printer and the things I can get out of it. Here are some pics and a link to videos of it running. Note that I did only _slight_ post-print finishing as I was focused on getting the entire piece done and working. I’m still iterating over circuit design and will be making a much smaller version soon, which will need a new case. I’ll eventually get the case design to a point that I’ll properly finish the prints and paint them. I’m excited for the flexible resin so I can print the wristbands instead of using other materials. ![](http://forum.formlabs.com/uploads/formlabs/969/9b3d0a706fa9eb01.png) ![](http://forum.formlabs.com/uploads/formlabs/970/37551e214f284c48.png) ![](http://forum.formlabs.com/uploads/formlabs/974/9b740d8dcee296d6.png) ![](http://forum.formlabs.com/uploads/formlabs/971/ecfb49db5fc0ae96.png) Videos: [https://vimeo.com/108754005](https://vimeo.com/108754005) & [https://vimeo.com/109344272](https://vimeo.com/109344272)