# Wash L and Cure L notifications

**URL:** <https://forum.formlabs.com/t/wash-l-and-cure-l-notifications/43749>\
**Category:** Feature Requests & Ideas\
**Created:** [February 27, 2025, 2:40pm UTC](https://forum.formlabs.com/t/wash-l-and-cure-l-notifications/43749 "2025-02-27T14:40:48Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![Lantech50](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/lantech50/32/20390_2.png) [@Lantech50](https://forum.formlabs.com/u/Lantech50)\
**Post date:** [February 27, 2025, 2:40pm UTC](https://forum.formlabs.com/t/wash-l-and-cure-l-notifications/43749/1 "2025-02-27T14:40:49Z")

</div>

I think a nnice feature would be to have the Wash L and Cure L notify when they are finished. seeing how they are already connected to wifi, wouldn’t think it would be hard to add to the Dashboard

---

<div class="post-metadata">

**Author:** ![MattRForerunner](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/mattrforerunner/32/20355_2.png) [@MattRForerunner](https://forum.formlabs.com/u/MattRForerunner)\
**Post date:** [February 27, 2025, 2:56pm UTC](https://forum.formlabs.com/t/wash-l-and-cure-l-notifications/43749/2 "2025-02-27T14:56:07Z")

</div>

just set a timer on your phone

---

<div class="post-metadata">

**Author:** ![verdugod](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/verdugod/32/20335_2.png) [@verdugod](https://forum.formlabs.com/u/verdugod)\
**Post date:** [February 27, 2025, 10:51pm UTC](https://forum.formlabs.com/t/wash-l-and-cure-l-notifications/43749/4 "2025-02-27T22:51:36Z")

</div>

Thanks for your feedback @Lantech50 , we’ve heard other customers requesting this too, and like all feature requests, we’ve passed these along to our Engineering team.

Thanks for your insights! And for now, we recommend you do the @MattRForerunner analog version and set that timer ; )

---

<div class="post-metadata">

**Author:** ![Lantech50](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/lantech50/32/20390_2.png) [@Lantech50](https://forum.formlabs.com/u/Lantech50)\
**Post date:** [March 3, 2025, 12:01pm UTC](https://forum.formlabs.com/t/wash-l-and-cure-l-notifications/43749/6 "2025-03-03T12:01:09Z")

</div>

for mulitple units, and users on our team, it is not feasible to have everyone settings timers.  
for the Wash L stations, we have set the security cameras to detect motion on these units, so they will detect the lids opening and send notifications.

---

<div class="post-metadata">

**Author:** ![verdugod](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/verdugod/32/20335_2.png) [@verdugod](https://forum.formlabs.com/u/verdugod)\
**Post date:** [March 3, 2025, 3:09pm UTC](https://forum.formlabs.com/t/wash-l-and-cure-l-notifications/43749/7 "2025-03-03T15:09:52Z")

</div>

Great feedback and clever work around! We definitely understand the need. Thanks for sharing your request, this has been shared with our R+D team.

---

<div class="post-metadata">

**Author:** ![Davidwedge](https://avatars.discourse-cdn.com/v4/letter/d/a3d4f5/32.png) [@Davidwedge](https://forum.formlabs.com/u/Davidwedge)\
**Post date:** [March 20, 2025, 6:29pm UTC](https://forum.formlabs.com/t/wash-l-and-cure-l-notifications/43749/8 "2025-03-20T18:29:35Z")

</div>

If you’re adding that, put a NIC on them, if your board has the ability… greatly appreciated for those of us who run wired locations…

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [September 19, 2025, 6:30am UTC](https://forum.formlabs.com/t/wash-l-and-cure-l-notifications/43749/9 "2025-09-19T06:30:13Z")

</div>

This topic was automatically closed 182 days after the last reply. New replies are no longer allowed.