# Wanted Though 2cm x 3mm test print **URL:** \ **Category:** Support & Troubleshooting\ **Created:** [March 15, 2016, 5:14am UTC](https://forum.formlabs.com/t/wanted-though-2cm-x-3mm-test-print/7509 "2016-03-15T05:14:41Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![dwizeno](https://avatars.discourse-cdn.com/v4/letter/d/8baadc/32.png) [@dwizeno](https://forum.formlabs.com/u/dwizeno)\ **Post date:** [March 15, 2016, 5:14am UTC](https://forum.formlabs.com/t/wanted-though-2cm-x-3mm-test-print/7509/1 "2016-03-15T05:14:41Z")
Contemplating printer purchase Would like to do some destructive testing at 60deg Celcius of Tough material before jumping in. Want to know how material holds out that much above its HDT. Anyone willing to send a couple of solid tubes 2cm x 3mm in Though material? ---
**Author:** ![ScottBarbour](https://avatars.discourse-cdn.com/v4/letter/s/b5ac83/32.png) [@ScottBarbour](https://forum.formlabs.com/u/ScottBarbour)\ **Post date:** [March 17, 2016, 7:52pm UTC](https://forum.formlabs.com/t/wanted-though-2cm-x-3mm-test-print/7509/2 "2016-03-17T19:52:48Z")
It gets really flexible when it’s hot! ---
**Author:** ![dwizeno](https://avatars.discourse-cdn.com/v4/letter/d/8baadc/32.png) [@dwizeno](https://forum.formlabs.com/u/dwizeno)\ **Post date:** [March 17, 2016, 8:26pm UTC](https://forum.formlabs.com/t/wanted-though-2cm-x-3mm-test-print/7509/3 "2016-03-17T20:26:35Z")
Thanks for feedback, if really flexible then a test print is not worth the effort. Not a functional match. ---
**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\ **Post date:** [March 31, 2016, 8:26pm UTC](https://forum.formlabs.com/t/wanted-though-2cm-x-3mm-test-print/7509/4 "2016-03-31T20:26:46Z")
This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.