# Used Form 2 For Sale - As Is Condition

**URL:** <https://forum.formlabs.com/t/used-form-2-for-sale-as-is-condition/31660>\
**Category:** Print Services &  Sales\
**Created:** [August 3, 2021, 2:27pm UTC](https://forum.formlabs.com/t/used-form-2-for-sale-as-is-condition/31660 "2021-08-03T14:27:36Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![DAR3Dprint](https://avatars.discourse-cdn.com/v4/letter/d/9d8465/32.png) [@DAR3Dprint](https://forum.formlabs.com/u/DAR3Dprint)\
**Post date:** [August 3, 2021, 2:27pm UTC](https://forum.formlabs.com/t/used-form-2-for-sale-as-is-condition/31660/1 "2021-08-03T14:27:36Z")

</div>

Form 2 printer for sale. Turns on and boots up fine. Factory reset performed successfully. Possibly one of the motor driver chips failed. Currently not in working condition - selling to be fixed, or for parts. Besides motor driver, in good condition otherwise.

Taking reasonable offers (located in US).

 ![Cropped%20Form%202](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/0/3/0363c7ae1922dbaf82edc6e440fbe4bd33c2e5af.jpg)

 ![Cropped%20Form%202%20-%20open](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/0/6/061b3cc0669c8552cd36ba4bdbd7a01e538fb09b.jpg)

---

<div class="post-metadata">

**Author:** ![rkagerer](https://avatars.discourse-cdn.com/v4/letter/r/439d5e/32.png) [@rkagerer](https://forum.formlabs.com/u/rkagerer)\
**Post date:** [August 3, 2021, 6:54pm UTC](https://forum.formlabs.com/t/used-form-2-for-sale-as-is-condition/31660/2 "2021-08-03T18:54:33Z")

</div>

Hi @DAR3Dprint,

What happens when you try to print? What would you consider a reasonable offer?

Thanks!

---

<div class="post-metadata">

**Author:** ![DAR3Dprint](https://avatars.discourse-cdn.com/v4/letter/d/9d8465/32.png) [@DAR3Dprint](https://forum.formlabs.com/u/DAR3Dprint)\
**Post date:** [August 4, 2021, 4:24pm UTC](https://forum.formlabs.com/t/used-form-2-for-sale-as-is-condition/31660/3 "2021-08-04T16:24:47Z")

</div>

> [@rkagerer](#):
>
> Hi @DAR3Dprint,
> 
> What happens when you try to print? What would you consider a reasonable offer?
> 
> Thanks!

Currently I do not have an usable Form 2 Tank, so I cannot try to print. The last print that was tried, the motor driver failed to raise the build platform arm up all the way (as shown in the pictures).

All reasonable offers will be considered. Feel free to direct message me an offer if you’d like!

Thanks!

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [August 18, 2021, 4:24pm UTC](https://forum.formlabs.com/t/used-form-2-for-sale-as-is-condition/31660/4 "2021-08-18T16:24:49Z")

</div>

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.