# 怎么能换树脂但不换树脂槽呢

**URL:** <https://forum.formlabs.com/t/topic/23942>\
**Category:** 中文版块［Chinese］\
**Created:** [July 10, 2019, 2:01pm UTC](https://forum.formlabs.com/t/topic/23942 "2019-07-10T14:01:05Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Joe4](https://avatars.discourse-cdn.com/v4/letter/j/c37758/32.png) [@Joe4](https://forum.formlabs.com/u/Joe4)\
**Post date:** [July 10, 2019, 2:01pm UTC](https://forum.formlabs.com/t/topic/23942/1 "2019-07-10T14:01:05Z")

</div>

不想买那么多树脂槽，希望可以用一个树脂槽打印不同树脂，那么怎么能够清洗干净树脂槽内部而不损伤树脂槽呢？求助大神

---

<div class="post-metadata">

**Author:** ![danqing](https://avatars.discourse-cdn.com/v4/letter/d/97f17d/32.png) [@danqing](https://forum.formlabs.com/u/danqing)\
**Post date:** [December 13, 2019, 8:37pm UTC](https://forum.formlabs.com/t/topic/23942/2 "2019-12-13T20:37:52Z")

</div>

hi  
可以试一下先把所有液体倒出铲光，用IPA和PEC-PAD 无绒湿巾擦干剩余液体，但是尽可能不要让IPA长时间接触或浸泡树脂槽。