# Tool holder! **URL:** \ **Category:** Projects & Prints\ **Created:** [April 28, 2017, 11:56am UTC](https://forum.formlabs.com/t/tool-holder/13022 "2017-04-28T11:56:51Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![areffelt](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/areffelt/32/15255_2.png) [@areffelt](https://forum.formlabs.com/u/areffelt)\ **Post date:** [April 28, 2017, 11:56am UTC](https://forum.formlabs.com/t/tool-holder/13022/1 "2017-04-28T11:56:51Z")
Made a tool holder for the various Formlabs supplied print removal tools. ![](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/b/b8fa3e36bdd93a62cadf765ffdcd1c765342447e.jpg) Here are the STL’s! .[Post.STL](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/f/f88768075ef04f399884ace862349fe3e97c6d79.STL) (23.5 KB) [Base.STL](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/9/94367657ceff9e34e94859fa7732ff75c203b268.STL) (172.8 KB) [tool holder.STL](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/c/c9faa646805f1a3d73d3cf1fcfc5218f41288574.STL) (403.7 KB) (link) [Here is the .FORM file already setup to run w/ clear resin.](https://drive.google.com/open?id=0BwfpaQkOp9RvNDEtV1dqTDdJVGs) ---
**Author:** ![Frew](https://avatars.discourse-cdn.com/v4/letter/f/c0e974/32.png) [@Frew](https://forum.formlabs.com/u/Frew)\ **Post date:** [April 28, 2017, 5:30pm UTC](https://forum.formlabs.com/t/tool-holder/13022/2 "2017-04-28T17:30:31Z")
Not sure why .form upload isn’t working for you but linking to file sharing services like dropbox and google drive tend to be good workarounds 🙂 ---
**Author:** ![areffelt](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/areffelt/32/15255_2.png) [@areffelt](https://forum.formlabs.com/u/areffelt)\ **Post date:** [April 28, 2017, 6:00pm UTC](https://forum.formlabs.com/t/tool-holder/13022/3 "2017-04-28T18:00:59Z")
@Frew, Not really sure myself but I tried with Opera and IE11, both gave the same error.