# Timelapse for Fuse 1+ **URL:** \ **Category:** Feature Requests & Ideas\ **Created:** [September 11, 2025, 8:37am UTC](https://forum.formlabs.com/t/timelapse-for-fuse-1/45390 "2025-09-11T08:37:25Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![Edouardh](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/edouardh/32/22263_2.png) [@Edouardh](https://forum.formlabs.com/u/Edouardh)\ **Post date:** [September 11, 2025, 8:37am UTC](https://forum.formlabs.com/t/timelapse-for-fuse-1/45390/1 "2025-09-11T08:37:25Z")
Dear Formlabs Team, Some of your social media content includes timelapse videos coming from the Fuse 1+ camera. Why is this still not available to clients as well? I already raised this via email months ago and I was told the team was working on it. It shouldn’t be a very challenging feature to deploy in my opinion. Kindly, Edouard ---
**Author:** ![agoston](https://avatars.discourse-cdn.com/v4/letter/a/76d3ee/32.png) [@agoston](https://forum.formlabs.com/u/agoston)\ **Post date:** [September 11, 2025, 1:58pm UTC](https://forum.formlabs.com/t/timelapse-for-fuse-1/45390/2 "2025-09-11T13:58:44Z")
Hi Edouard, If you are running the latest firmware (1.22.x) and have print image collection enabled, you can find the print video in the printer history logs. You can learn more about this here: > **[Formlabs Customer Support](https://support.formlabs.com/s/article/Downloading-printer-history-SLS?language=en_US)** > > Submit a support ticket or use our self-service articles ---
**Author:** ![Sophia\_M](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/sophia_m/32/21969_2.png) [@Sophia\_M](https://forum.formlabs.com/u/Sophia_M)\ **Post date:** [September 11, 2025, 3:10pm UTC](https://forum.formlabs.com/t/timelapse-for-fuse-1/45390/3 "2025-09-11T15:10:47Z")
Hi Edouard, thank you for reaching out and sharing your suggestion! While we don’t have any timeline for a timelapse tool similar to the one on Form 4, it is already possible to access video data of your Fuse 1+ prints. You can find more info on that here: [customer\_v2](https://support.formlabs.com/s/article/Downloading-printer-history-SLS) These videos are mainly meant to facilitate troubleshooting, but could theoretically also be leveraged for the creation of timelapse videos for visual purposes. I hope this helps! Best, Sophia ---
**Author:** ![CARobertM](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/carobertm/32/21421_2.png) [@CARobertM](https://forum.formlabs.com/u/CARobertM)\ **Post date:** [September 11, 2025, 4:00pm UTC](https://forum.formlabs.com/t/timelapse-for-fuse-1/45390/4 "2025-09-11T16:00:18Z")
Its possible but its buried in a hidden menu and you have to review the logs to identify the video you are looking for. Short of requiring code, this couldn’t be less user friendly. I wish formlabs priorities were customer needs, not corporate greed. ---
**Author:** ![Edouardh](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/edouardh/32/22263_2.png) [@Edouardh](https://forum.formlabs.com/u/Edouardh)\ **Post date:** [September 12, 2025, 2:44am UTC](https://forum.formlabs.com/t/timelapse-for-fuse-1/45390/5 "2025-09-12T02:44:27Z")
Thank you all for your replies! It’s good to know that it’s technically possible, I’ll give it a try. And as Robert mentioned, it would be better to have something user-friendly that isn’t deeply buried 🙂 ---
**Author:** ![CARobertM](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/carobertm/32/21421_2.png) [@CARobertM](https://forum.formlabs.com/u/CARobertM)\ **Post date:** [September 17, 2025, 3:39am UTC](https://forum.formlabs.com/t/timelapse-for-fuse-1/45390/6 "2025-09-17T03:39:55Z")
Again. I really wish we had full camera access. ---
**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\ **Post date:** [March 18, 2026, 3:39pm UTC](https://forum.formlabs.com/t/timelapse-for-fuse-1/45390/7 "2026-03-18T15:39:58Z")
This topic was automatically closed 182 days after the last reply. New replies are no longer allowed.