# Time saver easy depowdering of fuse and fuse 1+prints

**URL:** <https://forum.formlabs.com/t/time-saver-easy-depowdering-of-fuse-and-fuse-1-prints/44023>\
**Category:** Projects & Prints\
**Created:** [April 2, 2025, 1:08am UTC](https://forum.formlabs.com/t/time-saver-easy-depowdering-of-fuse-and-fuse-1-prints/44023 "2025-04-02T01:08:04Z")\
**Posts on this page:** 6\
**Page:** 3

<div class="post-metadata">

**Author:** ![scmetz](https://avatars.discourse-cdn.com/v4/letter/s/e47774/32.png) [@scmetz](https://forum.formlabs.com/u/scmetz)\
**Post date:** [May 5, 2025, 11:42am UTC](https://forum.formlabs.com/t/time-saver-easy-depowdering-of-fuse-and-fuse-1-prints/44023/42 "2025-05-05T11:42:17Z")

</div>

I wonder if you use the same material you are printing with as the blast media could you just sift and use the powder to print then?

---

<div class="post-metadata">

**Author:** ![CARobertM](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/carobertm/32/21421_2.png) [@CARobertM](https://forum.formlabs.com/u/CARobertM)\
**Post date:** [May 19, 2025, 7:12pm UTC](https://forum.formlabs.com/t/time-saver-easy-depowdering-of-fuse-and-fuse-1-prints/44023/43 "2025-05-19T19:12:44Z")

</div>

only if you think you can sift out all the glass fragments as the media breaks down.  
I am skeptical you could reclaim a pure powder.

---

<div class="post-metadata">

**Author:** ![SMute](https://avatars.discourse-cdn.com/v4/letter/s/ba8739/32.png) [@SMute](https://forum.formlabs.com/u/SMute)\
**Post date:** [May 19, 2025, 9:05pm UTC](https://forum.formlabs.com/t/time-saver-easy-depowdering-of-fuse-and-fuse-1-prints/44023/44 "2025-05-19T21:05:19Z")

</div>

There is a significant density difference between the two materials so it is possible in theory. It just may not be worth the effort.

---

<div class="post-metadata">

**Author:** ![CARobertM](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/carobertm/32/21421_2.png) [@CARobertM](https://forum.formlabs.com/u/CARobertM)\
**Post date:** [May 19, 2025, 9:43pm UTC](https://forum.formlabs.com/t/time-saver-easy-depowdering-of-fuse-and-fuse-1-prints/44023/45 "2025-05-19T21:43:04Z")

</div>

Thats true, i only considered particle size for sifting.

---

<div class="post-metadata">

**Author:** ![scmetz](https://avatars.discourse-cdn.com/v4/letter/s/e47774/32.png) [@scmetz](https://forum.formlabs.com/u/scmetz)\
**Post date:** [May 20, 2025, 12:20pm UTC](https://forum.formlabs.com/t/time-saver-easy-depowdering-of-fuse-and-fuse-1-prints/44023/46 "2025-05-20T12:20:07Z")

</div>

I was actually wondering about using the same powder that you print with in the blaster. Just not sure if it would be abrasive enough.

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [November 19, 2025, 12:20am UTC](https://forum.formlabs.com/t/time-saver-easy-depowdering-of-fuse-and-fuse-1-prints/44023/47 "2025-11-19T00:20:59Z")

</div>

Closed on November 19, 2025, 12:20am UTC

This topic was automatically closed 182 days after the last reply. New replies are no longer allowed.

[Previous page](https://forum.formlabs.com/t/time-saver-easy-depowdering-of-fuse-and-fuse-1-prints/44023.md?page=2)
