# The dimensions did not match after printing.

**URL:** <https://forum.formlabs.com/t/the-dimensions-did-not-match-after-printing/45501>\
**Category:** Form 2\
**Created:** [September 30, 2025, 12:54pm UTC](https://forum.formlabs.com/t/the-dimensions-did-not-match-after-printing/45501 "2025-09-30T12:54:17Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![StartLamp](https://avatars.discourse-cdn.com/v4/letter/s/46a35a/32.png) [@StartLamp](https://forum.formlabs.com/u/StartLamp)\
**Post date:** [September 30, 2025, 12:54pm UTC](https://forum.formlabs.com/t/the-dimensions-did-not-match-after-printing/45501/1 "2025-09-30T12:54:18Z")

</div>

[forum.form](https://forum.formlabs.com/uploads/short-url/90H4cJoXU7cYohxP2ZHQ3L3iFHV.form) (2.1 MB)

 ![Detail](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/9/5/95faa710bf6f67bbb6b5954ad60c97b1e50e9183.jpeg)

The dimensions did not match after printing.  
A part was printed for centering the nozzles, which is a platform with pyramids (file attached). Its design dimensions are 120x120 mm, in fact 120,50x120,60 mm. This moment is not as frightening as what happened to the pyramids themselves. The base of the pyramids was not printed, and their centers were shifted (the direction of displacement in the photo).  
Form 2 printer, print accuracy of 0.025 mm, Clear V2 resin. Can you tell me what the problem might be and how I can solve it?

---

<div class="post-metadata">

**Author:** ![jessbuck](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/jessbuck/32/21430_2.png) [@jessbuck](https://forum.formlabs.com/u/jessbuck)\
**Post date:** [September 30, 2025, 1:33pm UTC](https://forum.formlabs.com/t/the-dimensions-did-not-match-after-printing/45501/2 "2025-09-30T13:33:27Z")

</div>

@StartLamp I’m sorry to hear that your Form 2 is having some issues printing this file. I have a couple of suggestions to try to help get this working as expected.

- How old is your [resin tank](https://support.formlabs.com/s/article/Inspecting-and-cleaning-standard-resin-tanks-and-Resin-Tanks-LT-Form-2?language=en_US)? It may be time to replace your [resin tank](https://formlabs.com/store/?s=Form+2+tank).
- Clean all of the optics
  - Clean the [optical window](https://support.formlabs.com/s/article/Cleaning-the-Glass-Optical-Window-Form2?language=en_US) and the [underside of the optical window](https://support.formlabs.com/s/article/Troubleshooting-and-maintenance-guides-Form-2?language=en_US#clean-underside-window)
  - Clean the [galvanometer mirrors](https://support.formlabs.com/s/article/Troubleshooting-and-maintenance-guides-Form-2?language=en_US#clean-galvo-mirror)
  - Clean the [main mirror](https://support.formlabs.com/s/article/Troubleshooting-and-maintenance-guides-Form-2?language=en_US#clean-main-mirror)

- Print the [optics test](https://drive.google.com/file/d/1GW7x_NueaZ4DgMZarj5_MhzgtdGFzntf/view?usp=sharing)

Once you’ve completed those steps, please upload a few photos from the optics test. I’d be happy to take a look at it and let you know what the next steps would be. Alternatively, you can open a [support case](https://support.formlabs.com/s/contact-support?language=en_US) and have one of our agents assist you with the next steps.

---

<div class="post-metadata">

**Author:** ![StartLamp](https://avatars.discourse-cdn.com/v4/letter/s/46a35a/32.png) [@StartLamp](https://forum.formlabs.com/u/StartLamp)\
**Post date:** [October 1, 2025, 1:17pm UTC](https://forum.formlabs.com/t/the-dimensions-did-not-match-after-printing/45501/3 "2025-10-01T13:17:26Z")

</div>

Thank you very much for your advice and for the optics test. I can’t say how much time has passed since the resin tank was manufactured.  
I haven’t cleaned the optical elements yet.  
First, I printed out the optics test, I’m waiting for the part to dry, and I’ll send you photos with the results.  
Sincerely, Dybin N.A.

---

<div class="post-metadata">

**Author:** ![StartLamp](https://avatars.discourse-cdn.com/v4/letter/s/46a35a/32.png) [@StartLamp](https://forum.formlabs.com/u/StartLamp)\
**Post date:** [October 2, 2025, 12:07pm UTC](https://forum.formlabs.com/t/the-dimensions-did-not-match-after-printing/45501/4 "2025-10-02T12:07:00Z")

</div>

![IMG_20251002_111714079](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/3/8/3846712658a08f9a3fca520c3263d4874c4c4bb9.jpeg)

 ![IMG_20251002_111752575](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/a/5/a56173348168d38d92c039a82e7e3b426e75b83c.jpeg)

 ![IMG_20251002_111741094](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/4/2/42e11818288da32843e5e220ede8cb1964bc2826.jpeg)

 ![IMG_20251002_111735295](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/8/585bbbd658e838e4762cbc6f4b166a1c811432bf.jpeg)

 ![IMG_20251002_111728357](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/0/2/024e3f1d2564f17fd1ac91b092d5e212b5fd75ab.jpeg)

---

<div class="post-metadata">

**Author:** ![jessbuck](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/jessbuck/32/21430_2.png) [@jessbuck](https://forum.formlabs.com/u/jessbuck)\
**Post date:** [October 2, 2025, 1:40pm UTC](https://forum.formlabs.com/t/the-dimensions-did-not-match-after-printing/45501/5 "2025-10-02T13:40:41Z")

</div>

@StartLamp I have to say that is one of the best Optical Tests on a Form 2 that I’ve ever seen. That would lead me to believe that a new resin tank (if that wasn’t printed on a new one) will help a lot.

---

<div class="post-metadata">

**Author:** ![StartLamp](https://avatars.discourse-cdn.com/v4/letter/s/46a35a/32.png) [@StartLamp](https://forum.formlabs.com/u/StartLamp)\
**Post date:** [October 3, 2025, 2:28pm UTC](https://forum.formlabs.com/t/the-dimensions-did-not-match-after-printing/45501/6 "2025-10-03T14:28:10Z")

</div>

I decided to test the printer. Without cleaning the container of resin left over from the previous print, I installed a new one. The next morning, I discovered that the part had printed, but there was a broke in the vat, a fairly large one at that. Resin was leaking out.  
Unfortunately, the dimensions were still not correct.

 ![IMG_20251003_170735517](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/8/9/89ee157fb59b8ac15e75236a4a3fa101d3336017.jpeg)

 ![IMG_20251003_170833431](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/5/557ca53c3f0e0be932f5c9a9ee7c1b331fece433.jpeg)

---

<div class="post-metadata">

**Author:** ![jessbuck](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/jessbuck/32/21430_2.png) [@jessbuck](https://forum.formlabs.com/u/jessbuck)\
**Post date:** [October 3, 2025, 2:48pm UTC](https://forum.formlabs.com/t/the-dimensions-did-not-match-after-printing/45501/7 "2025-10-03T14:48:27Z")

</div>

@StartLamp I’m sorry to hear that the resin tank is damaged and that the print still wasn’t correct. From here, the best next step is to open a [support case](https://support.formlabs.com/s/contact-support?language=en_US).

Also, I have a guide for you for [cleaning after a resin spill](https://support.formlabs.com/s/article/Cleaning-After-a-Resin-Spill?language=en_US) to help get the mess cleaned up.
