# Test print for used form2

**URL:** <https://forum.formlabs.com/t/test-print-for-used-form2/32410>\
**Category:** Form 2\
**Created:** [November 10, 2021, 10:55pm UTC](https://forum.formlabs.com/t/test-print-for-used-form2/32410 "2021-11-10T22:55:03Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![MrCedric11111](https://avatars.discourse-cdn.com/v4/letter/m/f475e1/32.png) [@MrCedric11111](https://forum.formlabs.com/u/MrCedric11111)\
**Post date:** [November 10, 2021, 10:55pm UTC](https://forum.formlabs.com/t/test-print-for-used-form2/32410/1 "2021-11-10T22:55:03Z")

</div>

Hello

I bought a used form2 and I would like to check if the printer and the resolution is ok.  
Is-there something special to do? Like a print test with a special 3d model? 🤓

---

<div class="post-metadata">

**Author:** ![MrCedric11111](https://avatars.discourse-cdn.com/v4/letter/m/f475e1/32.png) [@MrCedric11111](https://forum.formlabs.com/u/MrCedric11111)\
**Post date:** [November 11, 2021, 8:18am UTC](https://forum.formlabs.com/t/test-print-for-used-form2/32410/2 "2021-11-11T08:18:39Z")

</div>

😄  
I reply to my own question if it could helps someone else, here is a link with a procedure test :

> **[Printing the Form 2 Optics Test.pdf](https://drive.google.com/file/d/1GW7x_NueaZ4DgMZarj5_MhzgtdGFzntf/view)**
>
> Google Drive file.