# Supports on Shallow Angled Flat Face **URL:** \ **Category:** Feature Requests & Ideas\ **Created:** [February 17, 2015, 4:58pm UTC](https://forum.formlabs.com/t/supports-on-shallow-angled-flat-face/3711 "2015-02-17T16:58:34Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![Steve\_Johnstone](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/steve_johnstone/32/998_2.png) [@Steve\_Johnstone](https://forum.formlabs.com/u/Steve_Johnstone)\ **Post date:** [February 17, 2015, 5:12pm UTC](https://forum.formlabs.com/t/supports-on-shallow-angled-flat-face/3711/2 "2015-02-17T17:12:26Z")
Hi @Charles_Rogers, this sounds very familiar to what I’ve been experiencing having - > [@Laser Flare & the effects on your print](http://forum.formlabs.com/t/laser-flare-the-effects-on-your-print/3489): > > This thread follows on from – [Trouble Shooting – Part cured resin (jello) after every print](http://forum.formlabs.com/t/trouble-shooting-part-cured-resin-jello-after-every-print/3313/64)[Form1+ laser flare issues illustrated – pic and video](http://forum.formlabs.com/t/form1-laser-flare-issues-illustrated-pics-and-video/3201/307) Previously it was my belief that cold resin was at the root of the major defects I was experiencing, with the laser flare compounding the effect. To some extent this is still true because the colder the resin is, the thicker it becomes. The effect of laser flare further thickens the resin whilst printing. It’s this part cured resin with the consiste… --- _[View the full topic](https://forum.formlabs.com/t/supports-on-shallow-angled-flat-face/3711)._