# Suddenly every print fails

**URL:** <https://forum.formlabs.com/t/suddenly-every-print-fails/9776>\
**Category:** Form 2\
**Created:** [September 27, 2016, 1:04am UTC](https://forum.formlabs.com/t/suddenly-every-print-fails/9776 "2016-09-27T01:04:03Z")\
**Posts on this page:** 6\
**Page:** 2

<div class="post-metadata">

**Author:** ![Zachary\_Brackin](https://avatars.discourse-cdn.com/v4/letter/z/4da419/32.png) [@Zachary\_Brackin](https://forum.formlabs.com/u/Zachary_Brackin)\
**Post date:** [September 30, 2016, 3:51pm UTC](https://forum.formlabs.com/t/suddenly-every-print-fails/9776/21 "2016-09-30T15:51:26Z")

</div>

Perhaps in the past you never printed over that area. Makes you wonder if there’s more spots inside.

---

<div class="post-metadata">

**Author:** ![BenMalcheski](https://avatars.discourse-cdn.com/v4/letter/b/0ea827/32.png) [@BenMalcheski](https://forum.formlabs.com/u/BenMalcheski)\
**Post date:** [October 3, 2016, 3:45pm UTC](https://forum.formlabs.com/t/suddenly-every-print-fails/9776/22 "2016-10-03T15:45:44Z")

</div>

I recently ran into a bunch of problems printing with my Form 2 as well where between all of the failures, reorientation, support structures, etc I used most of a cartridge of resin up. I never had a definitive resolution as I split the most troublesome part up into two parts. Even then, I can see where one of those parts nearly failed. I’m curious if you have any definitive information on what solved your problem.

---

<div class="post-metadata">

**Author:** ![KenCitron](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/kencitron/32/1741_2.png) [@KenCitron](https://forum.formlabs.com/u/KenCitron)\
**Post date:** [October 4, 2016, 2:22am UTC](https://forum.formlabs.com/t/suddenly-every-print-fails/9776/23 "2016-10-04T02:22:59Z")

</div>

Does look like you have some dust though on the main mirror. Those specs will be trouble. If an air blaster doesn’t take them off then fold up a pec-pad into 1/4 and gently wipe the dust off. Make sure you put on a fresh pair of gloves on before you handle the pad.

If you use a air blaster ( I have a Rocket) make sure you blast towards the sides so the dust doesn’t end up on the galvos or back mirror.

---

<div class="post-metadata">

**Author:** ![TZIgames](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/tzigames/32/7477_2.png) [@TZIgames](https://forum.formlabs.com/u/TZIgames)\
**Post date:** [October 4, 2016, 6:37pm UTC](https://forum.formlabs.com/t/suddenly-every-print-fails/9776/24 "2016-10-04T18:37:28Z")

</div>

Nothing definitive, still having the issue, still having flaking.  
However, they are sending me a new optical lense. I’ve cleaned it time and time again and there are some, for lack of a better word, pockmarks on the underside. I think those are the dust specks you think you’re seeing. It’s like the laser etched the surface. But just in 3 places.

---

<div class="post-metadata">

**Author:** ![KenCitron](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/kencitron/32/1741_2.png) [@KenCitron](https://forum.formlabs.com/u/KenCitron)\
**Post date:** [October 4, 2016, 10:40pm UTC](https://forum.formlabs.com/t/suddenly-every-print-fails/9776/25 "2016-10-04T22:40:03Z")

</div>

The surface is really delicate. Any pressure with even a pec-pad can scratch it. The big mirror is easy to replace though. Make sure you filter your resin before try again.

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [October 18, 2016, 10:40pm UTC](https://forum.formlabs.com/t/suddenly-every-print-fails/9776/26 "2016-10-18T22:40:16Z")

</div>

Closed on October 18, 2016, 10:40pm UTC

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.

[Previous page](https://forum.formlabs.com/t/suddenly-every-print-fails/9776.md?page=1)
