# Successful 1mm Shell Build

**URL:** <https://forum.formlabs.com/t/successful-1mm-shell-build/8885>\
**Category:** Projects & Prints\
**Created:** [July 12, 2016, 4:09am UTC](https://forum.formlabs.com/t/successful-1mm-shell-build/8885 "2016-07-12T04:09:55Z")\
**Posts on this page:** 18\
**Page:** 1

<div class="post-metadata">

**Author:** ![3DTOPO](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/3dtopo/32/6361_2.png) [@3DTOPO](https://forum.formlabs.com/u/3DTOPO)\
**Post date:** [July 12, 2016, 4:09am UTC](https://forum.formlabs.com/t/successful-1mm-shell-build/8885/1 "2016-07-12T04:09:55Z")

</div>

Printed with internal supports at 50 micron layer heights.

 ![](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/0/0f74d0db7be6e10b98b4c2772feb98ca1f4ff826.jpg)

---

<div class="post-metadata">

**Author:** ![AnnDavisStudio](https://avatars.discourse-cdn.com/v4/letter/a/8dc957/32.png) [@AnnDavisStudio](https://forum.formlabs.com/u/AnnDavisStudio)\
**Post date:** [July 12, 2016, 1:27pm UTC](https://forum.formlabs.com/t/successful-1mm-shell-build/8885/2 "2016-07-12T13:27:04Z")

</div>

Most excellent, I must make one!

---

<div class="post-metadata">

**Author:** ![Randy\_Cohen](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/randy_cohen/32/1500_2.png) [@Randy\_Cohen](https://forum.formlabs.com/u/Randy_Cohen)\
**Post date:** [July 12, 2016, 4:18pm UTC](https://forum.formlabs.com/t/successful-1mm-shell-build/8885/3 "2016-07-12T16:18:48Z")

</div>

1mm wall thicknesses are a challenge to print successfully. Looks like you’re getting the hang of it now! Nice!

---

<div class="post-metadata">

**Author:** ![Hillzzz](https://avatars.discourse-cdn.com/v4/letter/h/5daacb/32.png) [@Hillzzz](https://forum.formlabs.com/u/Hillzzz)\
**Post date:** [July 12, 2016, 8:36pm UTC](https://forum.formlabs.com/t/successful-1mm-shell-build/8885/4 "2016-07-12T20:36:32Z")

</div>

I have printed a series of Stands with 1mm walls and a logo on the front. They came out really well - Just selected no internal supports, let Preform choose the orientation and supports made 7 copies to fill the build plate and hit go! all seven came out fine. So i printed 7 more 🙂

---

<div class="post-metadata">

**Author:** ![3DTOPO](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/3dtopo/32/6361_2.png) [@3DTOPO](https://forum.formlabs.com/u/3DTOPO)\
**Post date:** [July 12, 2016, 9:09pm UTC](https://forum.formlabs.com/t/successful-1mm-shell-build/8885/5 "2016-07-12T21:09:35Z")

</div>

Thanks! The STL is here: [http://www.thingiverse.com/thing:29188](http://www.thingiverse.com/thing:29188)

---

<div class="post-metadata">

**Author:** ![3DTOPO](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/3dtopo/32/6361_2.png) [@3DTOPO](https://forum.formlabs.com/u/3DTOPO)\
**Post date:** [July 12, 2016, 9:11pm UTC](https://forum.formlabs.com/t/successful-1mm-shell-build/8885/6 "2016-07-12T21:11:53Z")

</div>

Well I suppose luck had more to do with it than skill! Well that and the brilliant people at Formlabs! 😉

I think I am going to attempt the same thing sans internal supports to see if that comes out.

I’m probably going to cast it out of copper - I’ll post pics of the cast - if they are worth sharing.

---

<div class="post-metadata">

**Author:** ![3DTOPO](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/3dtopo/32/6361_2.png) [@3DTOPO](https://forum.formlabs.com/u/3DTOPO)\
**Post date:** [July 12, 2016, 9:12pm UTC](https://forum.formlabs.com/t/successful-1mm-shell-build/8885/7 "2016-07-12T21:12:12Z")

</div>

Got any pics?

---

<div class="post-metadata">

**Author:** ![AnnDavisStudio](https://avatars.discourse-cdn.com/v4/letter/a/8dc957/32.png) [@AnnDavisStudio](https://forum.formlabs.com/u/AnnDavisStudio)\
**Post date:** [July 13, 2016, 6:46pm UTC](https://forum.formlabs.com/t/successful-1mm-shell-build/8885/8 "2016-07-13T18:46:05Z")

</div>

Yes, pix! Thanks for sharing your technique:)

---

<div class="post-metadata">

**Author:** ![3DTOPO](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/3dtopo/32/6361_2.png) [@3DTOPO](https://forum.formlabs.com/u/3DTOPO)\
**Post date:** [July 14, 2016, 10:57pm UTC](https://forum.formlabs.com/t/successful-1mm-shell-build/8885/9 "2016-07-14T22:57:12Z")

</div>

Well I tried our Lost Shell Sand Casting method, and the process doesn’t work nearly as good as it does with PLA plastic.

[![](https://img.youtube.com/vi/tA1znkGbnSQ/maxresdefault.jpg "3D Printed Lost Shell Sand Casting Technique") ](https://www.youtube.com/watch?v=tA1znkGbnSQ)

The method involved buying the print in sand and letting the molten metal vaporize the plastic.

It seems the part of the mold that filled first (his head) turned out pretty good, but the plastic wasn’t able to vaporize quickly enough and rose to the top of the mold causing turbulence and disrupting the sand mold (best I can tell). So I guess I will just stick to investment casting for SLA prints.

Worth a shot - otherwise I would have been left pondering if it might work well enough to use. 😉

(his 3rd eye was a 1mm drain hole I didn’t fill first)

 ![](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/c/c387161ba2bd76f728a0102adc635a962168f196.jpg)

---

<div class="post-metadata">

**Author:** ![ChristopherBarr](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/christopherbarr/32/645_2.png) [@ChristopherBarr](https://forum.formlabs.com/u/ChristopherBarr)\
**Post date:** [July 15, 2016, 5:13am UTC](https://forum.formlabs.com/t/successful-1mm-shell-build/8885/10 "2016-07-15T05:13:06Z")

</div>

But I love the accidental outcome - it looks like an ancient artifact. Cool!

But maybe the printer is just phase 1, where you print the model, cast that into a simple cutaway silicone [mold](https://www.smooth-on.com/tutorials/mold-star-15-demo-easy-high-tear-strength-platinum-silicone/), then cast solid versions of the print from a material that burns out very easily (possibly expanding urethane foam[[1](https://www.smooth-on.com/product-line/foam-it/)]?). Bury that cast object (in whatever castable material that burns out cleanly) in the sand. A lot cheaper and faster to make many as well.

---

<div class="post-metadata">

**Author:** ![3DTOPO](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/3dtopo/32/6361_2.png) [@3DTOPO](https://forum.formlabs.com/u/3DTOPO)\
**Post date:** [July 15, 2016, 6:04am UTC](https://forum.formlabs.com/t/successful-1mm-shell-build/8885/11 "2016-07-15T06:04:42Z")

</div>

Thanks! Not really what I was going for but art tends to have a mind of its own. 😉

You are correct for something like this it would certainly be possible to make a silicone mold and then use wax or some kind of foam. With wax though, it would have to be investment cast adding additional costs, time and energy.

But the point of this process (and my [Lost PLA](https://www.youtube.com/watch?v=WWVVSZP3Au4) process) is that it can be used with geometries that can not be removed from silicone molds. Further more, silicone molds don’t allow a high degree of dimensional accuracy so machine parts (e.g a gear) would come out too distorted to use - in my practice at least.

Another reason is I am mostly interested in one-offs. So for a single cast, it is less expensive and less time-consuming to burn out the original than it is to create a mold of it (castable silicone isn’t cheap). I don’t have any intention of starting a buddha statue factory, so I wouldn’t really make use of a silicone mold.

😉

---

<div class="post-metadata">

**Author:** ![ChristopherBarr](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/christopherbarr/32/645_2.png) [@ChristopherBarr](https://forum.formlabs.com/u/ChristopherBarr)\
**Post date:** [July 15, 2016, 1:21pm UTC](https://forum.formlabs.com/t/successful-1mm-shell-build/8885/12 "2016-07-15T13:21:22Z")

</div>

All true.

> [@3DTOPO](#):
>
> I don’t have any intention of starting a buddha statue factory

hehe, good. doesn’t sound too fun…

---

<div class="post-metadata">

**Author:** ![billiejean](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/billiejean/32/9236_2.png) [@billiejean](https://forum.formlabs.com/u/billiejean)\
**Post date:** [July 19, 2016, 3:05pm UTC](https://forum.formlabs.com/t/successful-1mm-shell-build/8885/13 "2016-07-19T15:05:50Z")

</div>

Curious, Why did you not use their Castable resin… I thought that was designed to be burned out

---

<div class="post-metadata">

**Author:** ![Hillzzz](https://avatars.discourse-cdn.com/v4/letter/h/5daacb/32.png) [@Hillzzz](https://forum.formlabs.com/u/Hillzzz)\
**Post date:** [July 19, 2016, 3:58pm UTC](https://forum.formlabs.com/t/successful-1mm-shell-build/8885/14 "2016-07-19T15:58:43Z")

</div>

Its designed to be burned out in the lost wax process and its much tougher and harder to burn out than wax. You would get much the same problem trying to use it for pour casting in sand.  
It would work perfectly in investment casting though.

---

<div class="post-metadata">

**Author:** ![billiejean](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/billiejean/32/9236_2.png) [@billiejean](https://forum.formlabs.com/u/billiejean)\
**Post date:** [July 20, 2016, 11:39pm UTC](https://forum.formlabs.com/t/successful-1mm-shell-build/8885/16 "2016-07-20T23:39:46Z")

</div>

Gotcha, I know just enough about foundry to be dangerous.  
I use my printer to make master patters for RTV w/ Poly Parts so no burning involved. 🙂

---

<div class="post-metadata">

**Author:** ![3DTOPO](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/3dtopo/32/6361_2.png) [@3DTOPO](https://forum.formlabs.com/u/3DTOPO)\
**Post date:** [July 20, 2016, 11:49pm UTC](https://forum.formlabs.com/t/successful-1mm-shell-build/8885/17 "2016-07-20T23:49:09Z")

</div>

That won’t work for most the geometry I am interested in casting in metal - undercuts, though-holes etc. are a no-go. Also, since I am mostly interested in one-offs, for me, a RTV mold is an extra process and expense. 😉

---

<div class="post-metadata">

**Author:** ![Hillzzz](https://avatars.discourse-cdn.com/v4/letter/h/5daacb/32.png) [@Hillzzz](https://forum.formlabs.com/u/Hillzzz)\
**Post date:** [July 21, 2016, 10:57am UTC](https://forum.formlabs.com/t/successful-1mm-shell-build/8885/18 "2016-07-21T10:57:22Z")

</div>

An alternative suggestion would be not to use SLA printing but instead to get some blocks of Machinable Wax and Mill the items you want in Wax on a CNC milling machine. If you have undercuts and holes etc then you can either use a 5 axis machine or mill the object in sections and glue them together with superglue into your final object. You can then use that to cast.

---

<div class="post-metadata">

**Author:** ![3DTOPO](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/3dtopo/32/6361_2.png) [@3DTOPO](https://forum.formlabs.com/u/3DTOPO)\
**Post date:** [July 21, 2016, 8:14pm UTC](https://forum.formlabs.com/t/successful-1mm-shell-build/8885/19 "2016-07-21T20:14:54Z")

</div>

I have a large (huge?) 4-axis CNC machine I use for carving patterns. But even with a 5-axis machine - its not practically possible to machine the same geometries a 3D printer is capable of producing. The detail practically obtainable with a CNC machine isn’t even close to a SLA print either (for organic geometries at least).

That said, if the pattern is wax, it still requires investment casting which is already possible with FDM and SLA prints. The point of my Lost Shell Sand cast process is it eliminates the need to use investment and works fine with FDM prints.

This was just an experiment to see if SLA prints worked similarly well as PLA does.
