# Stuck resin tray **URL:** \ **Category:** Form 1/1+\ **Created:** [January 12, 2018, 11:45am UTC](https://forum.formlabs.com/t/stuck-resin-tray/16777 "2018-01-12T11:45:12Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![jackofallarts](https://avatars.discourse-cdn.com/v4/letter/j/cab0a1/32.png) [@jackofallarts](https://forum.formlabs.com/u/jackofallarts)\ **Post date:** [January 12, 2018, 11:45am UTC](https://forum.formlabs.com/t/stuck-resin-tray/16777/1 "2018-01-12T11:45:13Z")
A while back I contacted formlabs about an issue with a stuck resin tray and was informed that it was a peel motor problem. Formlabs was awesome with getting me a replacement peel motor so that I can replace the one that wasn’t working. The problem I’m having now is how do I remove the stuck resin tray, I have all the videos I need of how to replace the motor but I can’t get any help on how to get out the resin tray so that I can take the unit apart to put in the new motor. Please help me out guys thank you ---
**Author:** ![FredB](https://avatars.discourse-cdn.com/v4/letter/f/838e76/32.png) [@FredB](https://forum.formlabs.com/u/FredB)\ **Post date:** [January 12, 2018, 1:23pm UTC](https://forum.formlabs.com/t/stuck-resin-tray/16777/2 "2018-01-12T13:23:35Z")
You’ll probably want to turn the shaft on the bad stepper to drive the tray up to a point where it can be removed. Can’t help you with getting to the stepper but that’s where I would start. ---
**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\ **Post date:** [January 27, 2018, 7:23pm UTC](https://forum.formlabs.com/t/stuck-resin-tray/16777/3 "2018-01-27T19:23:50Z")
This topic was automatically closed 15 days after the last reply. New replies are no longer allowed.