# SLS Tumbling Media Help

**URL:** <https://forum.formlabs.com/t/sls-tumbling-media-help/36611>\
**Category:** General Discussion\
**Created:** [July 25, 2023, 5:40pm UTC](https://forum.formlabs.com/t/sls-tumbling-media-help/36611 "2023-07-25T17:40:54Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![jdubose](https://avatars.discourse-cdn.com/v4/letter/j/aca169/32.png) [@jdubose](https://forum.formlabs.com/u/jdubose)\
**Post date:** [July 25, 2023, 5:40pm UTC](https://forum.formlabs.com/t/sls-tumbling-media-help/36611/1 "2023-07-25T17:40:54Z")

</div>

Hello All-

This is for the SLS Fuse 1/1+ community. Those of you that use vibratory tumbling for improved surface finish, would you mind sharing the media and detergent types and vendors that you use?

Form did a presentation not long ago about vibratory tumbling, but lacked in information on the specific types of media to use as a starting point. We know that this is very experimental based on part design and desired surface finish, so all we’re asking for is to help us outline a baseline that we can learn from.

We’ve recently acquired a few used [Burr King 15](https://www.burrking.com/catalog/p-100028/model-15-vibra-king-medium-bowls-combi-paks-1.3-cubic-feet) with speed controls.

I’ve also reached out to Formlabs, but I’d also like to hear from the community.

Thanks.

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [January 24, 2024, 5:41am UTC](https://forum.formlabs.com/t/sls-tumbling-media-help/36611/2 "2024-01-24T05:41:19Z")

</div>

This topic was automatically closed 182 days after the last reply. New replies are no longer allowed.