# Right click on part to show properties

**URL:** <https://forum.formlabs.com/t/right-click-on-part-to-show-properties/13392>\
**Category:** Feature Requests & Ideas\
**Created:** [May 22, 2017, 6:31pm UTC](https://forum.formlabs.com/t/right-click-on-part-to-show-properties/13392 "2017-05-22T18:31:33Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![FredB](https://avatars.discourse-cdn.com/v4/letter/f/838e76/32.png) [@FredB](https://forum.formlabs.com/u/FredB)\
**Post date:** [May 22, 2017, 6:31pm UTC](https://forum.formlabs.com/t/right-click-on-part-to-show-properties/13392/1 "2017-05-22T18:31:33Z")

</div>

I recently had a print with a bunch of parts that were visually the same except for fit tolerance.

It was a little confusing to keep track of where the parts were when I was setting up the print. If I got interrupted I’d lose track of where I was.

If we could right click on an object and display the file name and maybe build volume for that part it would help a lot in situations with multiple similar parts in one print.

---

<div class="post-metadata">

**Author:** ![Frew](https://avatars.discourse-cdn.com/v4/letter/f/c0e974/32.png) [@Frew](https://forum.formlabs.com/u/Frew)\
**Post date:** [May 23, 2017, 2:25pm UTC](https://forum.formlabs.com/t/right-click-on-part-to-show-properties/13392/2 "2017-05-23T14:25:47Z")

</div>

Some sort of object explorer or way of identifying the filenames of different models would certainly be a useful feature and I’ve forwarded this suggestion to our software team so that we can look into it.