# Resin Tank Over-filling?

**URL:** <https://forum.formlabs.com/t/resin-tank-over-filling/16350>\
**Category:** Form 2\
**Created:** [December 15, 2017, 10:11pm UTC](https://forum.formlabs.com/t/resin-tank-over-filling/16350 "2017-12-15T22:11:59Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![vnogueira](https://avatars.discourse-cdn.com/v4/letter/v/838e76/32.png) [@vnogueira](https://forum.formlabs.com/u/vnogueira)\
**Post date:** [December 15, 2017, 10:11pm UTC](https://forum.formlabs.com/t/resin-tank-over-filling/16350/1 "2017-12-15T22:11:59Z")

</div>

Installed PreForm 2.14.0 and the latest firmware.

Cleaned out the resin tank I use for Gray resin, and set a print starting. It’s been filling for 10-15 minutes, and it has filled over the “max fill” line on the tank ( pictures attached ) then it started printing.

Is it normal for the tank to fill this much? Is there a tank fill line adjustment I should be aware of?

 ![IMG_20171215_160227](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/d/deeccb5f02ce4a060fce5d1c01c709d3a21da3d5.jpg) ![IMG_20171215_160234](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/d/d858165d14d9fc67ce7cd80c30b8bbddf56593a8.jpg) ![IMG_20171215_160216](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/b/b3a0cda81bb799cb3917b090ef95ddeaf6d649a6.jpg) ![IMG_20171215_160222](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/b/b8ec9e1a23b641045310bdca22d3813a6ec09996.jpg)

---

<div class="post-metadata">

**Author:** ![Frew](https://avatars.discourse-cdn.com/v4/letter/f/c0e974/32.png) [@Frew](https://forum.formlabs.com/u/Frew)\
**Post date:** [December 18, 2017, 4:41pm UTC](https://forum.formlabs.com/t/resin-tank-over-filling/16350/2 "2017-12-18T16:41:42Z")

</div>

To be on the safe side, I’d recommend [opening a ticket with our support team](https://support.formlabs.com/hc/en-us) and keeping an eye on any prints in the mean time. The images don’t appear to be overfilled enough to cause a spill, but we can help to validate that the level sensor is working correctly and look into the root cause of this.

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [January 1, 2018, 4:41pm UTC](https://forum.formlabs.com/t/resin-tank-over-filling/16350/3 "2018-01-01T16:41:48Z")

</div>

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.