# Resin Print Temp/ Room Temp?

**URL:** <https://forum.formlabs.com/t/resin-print-temp-room-temp/12000>\
**Category:** Form 1/1+\
**Created:** [February 21, 2017, 9:13pm UTC](https://forum.formlabs.com/t/resin-print-temp-room-temp/12000 "2017-02-21T21:13:15Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![janajmfa](https://avatars.discourse-cdn.com/v4/letter/j/e19adc/32.png) [@janajmfa](https://forum.formlabs.com/u/janajmfa)\
**Post date:** [February 24, 2017, 7:25am UTC](https://forum.formlabs.com/t/resin-print-temp-room-temp/12000/2 "2017-02-24T07:25:35Z")

</div>

For anyone wondering about a resolution to this post I found the following thread and purchased the heated fan and then 3d printed the clip with my FDM printer:

> [@DIY print chamber HEATER that works great](http://forum.formlabs.com/t/diy-print-chamber-heater-that-works-great/3769):
>
> Living in Minnesota, there are many months of the year where my workroom is barely above 60 degrees F in the morning, and doesn’t get above 67 at any point in the day. The print success rate always drops for me when the temps drop, even if I prewarm the resin. After several failures, I finally found a great solution for maintaing a constant temp in the printing chamber, and it’s been working very well for several months now this winter. The product I bought and adapted for my Form1 is a small…

Here’s a good video on fine tuning the form 1+:

[![]( " - YouTube") ](https://www.youtube.com/watch?v=CB9OeCxT04U)

Here’s some good equipment:

> **[The Z-Slip - a deluxe light and dust cover for your Formlabs Form1/1+](http://www.zvatindustries.com/store/p19/The_Z-Slip_1_Dust_and_Light_Cover_-_Form_1_Compatible.html)**
>
> Formlabs cover resin tray sla Form1 Form1+ form2 3dprinting

---

_[View the full topic](https://forum.formlabs.com/t/resin-print-temp-room-temp/12000)._