# Resin LT tank reading as "Unknown"

**URL:** <https://forum.formlabs.com/t/resin-lt-tank-reading-as-unknown/18770>\
**Category:** Form 2\
**Created:** [May 15, 2018, 1:37pm UTC](https://forum.formlabs.com/t/resin-lt-tank-reading-as-unknown/18770 "2018-05-15T13:37:07Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![InfinityFabLab](https://avatars.discourse-cdn.com/v4/letter/i/8edcca/32.png) [@InfinityFabLab](https://forum.formlabs.com/u/InfinityFabLab)\
**Post date:** [May 15, 2018, 1:37pm UTC](https://forum.formlabs.com/t/resin-lt-tank-reading-as-unknown/18770/1 "2018-05-15T13:37:07Z")

</div>

I have just gotten a batch of Resin LT tanks and my Form 2 will not read them correctly. It comes up as 'Unknown" every time i put them in. I have cleaned the connection points, updated the software and firmware of the printing and it still won’t read it. For now I am running the prints in Open Mode, otherwise it won’t print with the LT tanks. Is there a way to solve this problem?

---

<div class="post-metadata">

**Author:** ![mcc](https://avatars.discourse-cdn.com/v4/letter/m/3e96dc/32.png) [@mcc](https://forum.formlabs.com/u/mcc)\
**Post date:** [May 15, 2018, 1:41pm UTC](https://forum.formlabs.com/t/resin-lt-tank-reading-as-unknown/18770/2 "2018-05-15T13:41:00Z")

</div>

What kind of version of firmware in printer do you have now ?

---

<div class="post-metadata">

**Author:** ![InfinityFabLab](https://avatars.discourse-cdn.com/v4/letter/i/8edcca/32.png) [@InfinityFabLab](https://forum.formlabs.com/u/InfinityFabLab)\
**Post date:** [May 15, 2018, 2:41pm UTC](https://forum.formlabs.com/t/resin-lt-tank-reading-as-unknown/18770/3 "2018-05-15T14:41:04Z")

</div>

the firmware is rc-1.17.7-29

---

<div class="post-metadata">

**Author:** ![mcc](https://avatars.discourse-cdn.com/v4/letter/m/3e96dc/32.png) [@mcc](https://forum.formlabs.com/u/mcc)\
**Post date:** [May 16, 2018, 6:17am UTC](https://forum.formlabs.com/t/resin-lt-tank-reading-as-unknown/18770/4 "2018-05-16T06:17:43Z")

</div>

I had the same issue as you:

> [@Great story of installing new tank](http://forum.formlabs.com/t/great-story-of-installing-new-tank/18378):
>
> At last. New LT resin tank arrived. We poured old resin into new one - and installed it into printer. First problem - printer said that the resin tank was used with another resin and it should be clean to “reset it” into hight temp resin tank. First few attempts failed. We’ve cleaned the resin. Nothing happened. Contacting to the support was OK. They told us that the drivers of the printer is old and it’s need to be updated. Second problem - automatic update was imposible due to “decyption f…

My version is 1.16.8-19 and we didn’t update it to the higher version - meaby you should somehow “rewind” the update to that version ? Printer “see” the LT tank in our ver.

---

<div class="post-metadata">

**Author:** ![InfinityFabLab](https://avatars.discourse-cdn.com/v4/letter/i/8edcca/32.png) [@InfinityFabLab](https://forum.formlabs.com/u/InfinityFabLab)\
**Post date:** [May 16, 2018, 1:02pm UTC](https://forum.formlabs.com/t/resin-lt-tank-reading-as-unknown/18770/5 "2018-05-16T13:02:35Z")

</div>

I updated our firmware because the older version wasn’t reading it either

---

<div class="post-metadata">

**Author:** ![mgarrity](https://avatars.discourse-cdn.com/v4/letter/m/82dd89/32.png) [@mgarrity](https://forum.formlabs.com/u/mgarrity)\
**Post date:** [May 16, 2018, 1:07pm UTC](https://forum.formlabs.com/t/resin-lt-tank-reading-as-unknown/18770/6 "2018-05-16T13:07:47Z")

</div>

I think any firmware starting with 1.15.4 should be fine with the LT tank. This doesn’t sound like a software problem. Have you contacted support yet?

---

<div class="post-metadata">

**Author:** ![arusso](https://avatars.discourse-cdn.com/v4/letter/a/a183cd/32.png) [@arusso](https://forum.formlabs.com/u/arusso)\
**Post date:** [May 16, 2018, 1:29pm UTC](https://forum.formlabs.com/t/resin-lt-tank-reading-as-unknown/18770/7 "2018-05-16T13:29:47Z")

</div>

@InfinityFabLab, I think it would be a good idea to open a support ticket, as well:

[https://support.formlabs.com/hc/en-us](https://support.formlabs.com/hc/en-us)

The LT tanks should be fine with the newest firmware, so our support team is best equipped to help you figure out if there’s another issue.

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [May 30, 2018, 1:29pm UTC](https://forum.formlabs.com/t/resin-lt-tank-reading-as-unknown/18770/8 "2018-05-30T13:29:56Z")

</div>

Closed on May 30, 2018, 1:29pm UTC

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.
