# Resin for form 1+

**URL:** <https://forum.formlabs.com/t/resin-for-form-1/32094>\
**Category:** General Discussion\
**Created:** [September 30, 2021, 10:35pm UTC](https://forum.formlabs.com/t/resin-for-form-1/32094 "2021-09-30T22:35:36Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![chrisk](https://avatars.discourse-cdn.com/v4/letter/c/6de8d8/32.png) [@chrisk](https://forum.formlabs.com/u/chrisk)\
**Post date:** [September 30, 2021, 10:35pm UTC](https://forum.formlabs.com/t/resin-for-form-1/32094/1 "2021-09-30T22:35:36Z")

</div>

Hey all

I got tossed in the middle of someone else’s project and am fairly unfamiliar with the form labs form 1+ that I have available for me to use. Currently the resin in the tank is maker juice labs for formlabs printers.

My question is are there any resins put there that you all recommend besides the formlabs resin? And to that point will the formlabs resin from the site store, work in a form 1+?

Any help and advice would be much appreciated

---

<div class="post-metadata">

**Author:** ![Dudemeister](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/dudemeister/32/13812_2.png) [@Dudemeister](https://forum.formlabs.com/u/Dudemeister)\
**Post date:** [September 30, 2021, 11:32pm UTC](https://forum.formlabs.com/t/resin-for-form-1/32094/2 "2021-09-30T23:32:35Z")

</div>

Do a search for ApplyLabWorks resin

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [April 1, 2022, 11:33am UTC](https://forum.formlabs.com/t/resin-for-form-1/32094/3 "2022-04-01T11:33:31Z")

</div>

This topic was automatically closed 182 days after the last reply. New replies are no longer allowed.