# Resin Definitions?

**URL:** <https://forum.formlabs.com/t/resin-definitions/9606>\
**Category:** General Discussion\
**Created:** [September 12, 2016, 12:07am UTC](https://forum.formlabs.com/t/resin-definitions/9606 "2016-09-12T00:07:55Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![Fred\_Baumgartner](https://avatars.discourse-cdn.com/v4/letter/f/d78d45/32.png) [@Fred\_Baumgartner](https://forum.formlabs.com/u/Fred_Baumgartner)\
**Post date:** [September 16, 2016, 2:18pm UTC](https://forum.formlabs.com/t/resin-definitions/9606/6 "2016-09-16T14:18:55Z")

</div>

I used the data above and some seat of the pants math to estimate laser values for the resins. This assumes a basic relation between the values in the chart and the laser power values (I used a percent shift as a starting point). The clear1 and grey1 settings are pretty sketchy because there isn’t enough data (I assumed a curve fit based on the two points available for clear1).

**Layer Ht 25 50 100**  
clear1 38 43 49  
grey1 37 45 48  
White 33 48 61  
Clear2 33 49 62  
Grey2 35 52 66  
Black2 42 62 79  
Castable 46 67 91

The formatting doesn’t work well. This makes more sense if you copy and paste into excel or open office. If I have a chance this weekend I’ll give the values a try for Formlabs clear2 resin.

---

_[View the full topic](https://forum.formlabs.com/t/resin-definitions/9606)._
