# Remote "Continue" button is needed for Preform

**URL:** <https://forum.formlabs.com/t/remote-continue-button-is-needed-for-preform/18714>\
**Category:** Feature Requests & Ideas\
**Created:** [May 10, 2018, 1:52pm UTC](https://forum.formlabs.com/t/remote-continue-button-is-needed-for-preform/18714 "2018-05-10T13:52:55Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![JohnHue](https://avatars.discourse-cdn.com/v4/letter/j/48db29/32.png) [@JohnHue](https://forum.formlabs.com/u/JohnHue)\
**Post date:** [May 10, 2018, 5:19pm UTC](https://forum.formlabs.com/t/remote-continue-button-is-needed-for-preform/18714/5 "2018-05-10T17:19:10Z")

</div>

> [@DigArt](#):
>
> But the counter doesn’t adjust and you end up with a low tank error.

Yeah, topping off the cartridge is much more practical but it leads to early resin level warning. For now i think you’re better off adding the remaining of the resin in the tank.

---

_[View the full topic](https://forum.formlabs.com/t/remote-continue-button-is-needed-for-preform/18714)._