# Recurring Issues with Corner Integrity in Resin 3D Printing

**URL:** <https://forum.formlabs.com/t/recurring-issues-with-corner-integrity-in-resin-3d-printing/38554>\
**Category:** Form 2\
**Created:** [July 2, 2024, 5:23pm UTC](https://forum.formlabs.com/t/recurring-issues-with-corner-integrity-in-resin-3d-printing/38554 "2024-07-02T17:23:13Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![hans3113](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/hans3113/32/20271_2.png) [@hans3113](https://forum.formlabs.com/u/hans3113)\
**Post date:** [July 2, 2024, 5:23pm UTC](https://forum.formlabs.com/t/recurring-issues-with-corner-integrity-in-resin-3d-printing/38554/1 "2024-07-02T17:23:13Z")

</div>

I have attempted to print this model four times, each with different positions and rotations using the Anycubic slicer, and I also tried Lychee with automatic support.

Each time, I’ve encountered the same issue, particularly at the corners, as shown in the pictures. When I place the model parallel to the bed, the corners lose their attachment, becoming rounded and loose with significant holes. I tried positioning the model at one corner and tilting it up to 30 degrees, which resulted in a better outcome than placing it parallel. In this orientation, the corners were still rounded, but there were no holes or detachment.

 ![1](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/c/3/c3f039324cfd16565c72d31a96eb5f745e773c0c.jpeg)  
 ![2](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/9/b/9b46258cbfbae55fc72fc6a3b8e6114505136638.jpeg)

Slicing Parameters:

- Layer Thickness: 0.05 mm
- Normal Exposure Time: 3.60 s
- Off Time: 0.50 s
- Bottom Exposure Time: 30.00 s
- Bottom Layers: 5
- Anti-alias: 1
- Z Lift Distance: 8.00 mm
- Z Lift Speed: 6.00 mm/s
- Z Retract Speed: 6.00 mm/s  
Could these issues be related to my slicing settings, or is there another problem I need to address?

---

<div class="post-metadata">

**Author:** ![henryqiu](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/henryqiu/32/21840_2.png) [@henryqiu](https://forum.formlabs.com/u/henryqiu)\
**Post date:** [July 2, 2024, 6:19pm UTC](https://forum.formlabs.com/t/recurring-issues-with-corner-integrity-in-resin-3d-printing/38554/2 "2024-07-02T18:19:37Z")

</div>

Hi, please generate support and slice your models with PreForm on Formlabs printers, we don’t support third-party slicers.