# r2d2

**URL:** <https://forum.formlabs.com/t/r2d2/278>\
**Category:** Projects & Prints\
**Created:** [July 19, 2013, 3:43pm UTC](https://forum.formlabs.com/t/r2d2/278 "2013-07-19T15:43:41Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![JeannineWoyansk](https://avatars.discourse-cdn.com/v4/letter/j/ebca7d/32.png) [@JeannineWoyansk](https://forum.formlabs.com/u/JeannineWoyansk)\
**Post date:** [July 19, 2013, 3:43pm UTC](https://forum.formlabs.com/t/r2d2/278/1 "2013-07-19T15:43:41Z")

</div>

Here’s a little fun print of R2D2.&nbsp; It’s hard to see in the pictures but there is a lot of detail.&nbsp; His leg broke off during support removal.&nbsp; I reconnected the leg with a dab of liquid resin and stuck it outside to cure.&nbsp; That repair worked pretty well.&nbsp; We used the .050mm, clear resin setting.&nbsp;We&nbsp;used the default support settings.&nbsp; &nbsp;He took 4.5 hours to print- he’s about 3" tall.

We just printed 2 parts to compare to the CNC machined version.&nbsp;&nbsp;I will post those results soon.

![](https://support.formlabs.com/attachments/token/621j40yb8ivqwir/?name=r2d2.JPG)

![](https://support.formlabs.com/attachments/token/jsqkxxapm0seihc/?name=r2d2+side.JPG)

---

<div class="post-metadata">

**Author:** ![DavidRosenfeld](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/davidrosenfeld/32/3570_2.png) [@DavidRosenfeld](https://forum.formlabs.com/u/DavidRosenfeld)\
**Post date:** [July 19, 2013, 8:15pm UTC](https://forum.formlabs.com/t/r2d2/278/2 "2013-07-19T20:15:18Z")

</div>

That is great. &nbsp;What is the black smudge?

---

<div class="post-metadata">

**Author:** ![JeannineWoyansk](https://avatars.discourse-cdn.com/v4/letter/j/ebca7d/32.png) [@JeannineWoyansk](https://forum.formlabs.com/u/JeannineWoyansk)\
**Post date:** [July 19, 2013, 8:54pm UTC](https://forum.formlabs.com/t/r2d2/278/3 "2013-07-19T20:54:12Z")

</div>

I don’t know&nbsp;what caused the black appearance in that spot.&nbsp;&nbsp;I’m guessing it could&nbsp;possibly be an air bubble, an impurity, or an artifact from the layering process???&nbsp; It’s looks like an optical effect from something- it’s internal to the part.&nbsp; I haven’t noticed it on any of the other objects I’ve printed- though this one has the most solid mass so far.

---

<div class="post-metadata">

**Author:** ![Devin](https://avatars.discourse-cdn.com/v4/letter/d/278dde/32.png) [@Devin](https://forum.formlabs.com/u/Devin)\
**Post date:** [July 22, 2013, 6:30pm UTC](https://forum.formlabs.com/t/r2d2/278/4 "2013-07-22T18:30:34Z")

</div>

Yay for printed robots 🙂

Here’s a 1/8 scale R2 dome (my own model) and a Wall-E (found it on thingiverse)

![](https://support.formlabs.com/attachments/token/v0oox4cpftujnfg/?name=r2_wall-e.jpg)

---

<div class="post-metadata">

**Author:** ![JeannineWoyansk](https://avatars.discourse-cdn.com/v4/letter/j/ebca7d/32.png) [@JeannineWoyansk](https://forum.formlabs.com/u/JeannineWoyansk)\
**Post date:** [July 24, 2013, 12:40pm UTC](https://forum.formlabs.com/t/r2d2/278/5 "2013-07-24T12:40:37Z")

</div>

very nice!&nbsp; how did the bottom of the dome turn out, and what angle, if any, did you use for printing the dome?

---

<div class="post-metadata">

**Author:** ![Devin](https://avatars.discourse-cdn.com/v4/letter/d/278dde/32.png) [@Devin](https://forum.formlabs.com/u/Devin)\
**Post date:** [July 24, 2013, 2:04pm UTC](https://forum.formlabs.com/t/r2d2/278/6 "2013-07-24T14:04:29Z")

</div>

This was hollow, only about 1/16" thick so there were a bunch of supports inside. &nbsp;I angled it slightly so that there were no supports on the radar eye, and only one support on the front and rear holoprojectors.
