# Quiet mode that raises build platform slower after peel **URL:** \ **Category:** Feature Requests & Ideas\ **Created:** [September 25, 2014, 10:23pm UTC](https://forum.formlabs.com/t/quiet-mode-that-raises-build-platform-slower-after-peel/2091 "2014-09-25T22:23:05Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![Brainfloat](https://avatars.discourse-cdn.com/v4/letter/b/58f4c7/32.png) [@Brainfloat](https://forum.formlabs.com/u/Brainfloat)\ **Post date:** [September 25, 2014, 10:23pm UTC](https://forum.formlabs.com/t/quiet-mode-that-raises-build-platform-slower-after-peel/2091/1 "2014-09-25T22:23:05Z")
The Form 1+ is already relatively quiet, but it’s still a bit noisy while raising the build platform and tank after a peel. As it’s much quieter while lowering the build platform/tank during the peel I think it would be nice to have the option of a quiet mode that uses the same slow speed in both directions (with the trade-off being slower prints). ---
**Author:** ![rkagerer](https://avatars.discourse-cdn.com/v4/letter/r/439d5e/32.png) [@rkagerer](https://forum.formlabs.com/u/rkagerer)\ **Post date:** [July 30, 2015, 1:09pm UTC](https://forum.formlabs.com/t/quiet-mode-that-raises-build-platform-slower-after-peel/2091/2 "2015-07-30T13:09:10Z")
GREAT suggestion! This might also help with certain types of prints where resin flow during the peel process causes print aberrations. BTW I think the Form 1 was actually quieter than the Form 1+. ---
**Author:** ![allan190](https://avatars.discourse-cdn.com/v4/letter/a/7ab992/32.png) [@allan190](https://forum.formlabs.com/u/allan190)\ **Post date:** [October 1, 2017, 10:48pm UTC](https://forum.formlabs.com/t/quiet-mode-that-raises-build-platform-slower-after-peel/2091/3 "2017-10-01T22:48:37Z")
I like this suggestion. I put a different spin on it though in my feature request here: [Quiet printing mode for overnight printing, or in living spaces](http://forum.formlabs.com/t/quiet-printing-mode-for-overnight-printing-or-in-living-spaces/15240)