# Quick curing

**URL:** <https://forum.formlabs.com/t/quick-curing/332>\
**Category:** Support & Troubleshooting\
**Created:** [August 7, 2013, 6:44pm UTC](https://forum.formlabs.com/t/quick-curing/332 "2013-08-07T18:44:37Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![WendellLuncefor](https://avatars.discourse-cdn.com/v4/letter/w/7cd45c/32.png) [@WendellLuncefor](https://forum.formlabs.com/u/WendellLuncefor)\
**Post date:** [August 7, 2013, 6:44pm UTC](https://forum.formlabs.com/t/quick-curing/332/1 "2013-08-07T18:44:37Z")

</div>

I print a lot at night, thus no sunlight for curing. &nbsp;Has anyone used any kind of light bulb to aid curing? &nbsp;Can I use a regular bulb, a daylight bulb (such as a 5500K photography light) or do I need a special UV build?

TIA

dell

---

<div class="post-metadata">

**Author:** ![SamJ](https://avatars.discourse-cdn.com/v4/letter/s/77aa72/32.png) [@SamJ](https://forum.formlabs.com/u/SamJ)\
**Post date:** [August 7, 2013, 9:32pm UTC](https://forum.formlabs.com/t/quick-curing/332/2 "2013-08-07T21:32:25Z")

</div>

You can always put parts in the window the next day, once they’ve printed! I assume there’s some daylight where you are, no?&nbsp;At any rate, you should see some curing with a regular light, though a UV bulb is ideal.

---

<div class="post-metadata">

**Author:** ![TemujinKuechle](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/temujinkuechle/32/4941_2.png) [@TemujinKuechle](https://forum.formlabs.com/u/TemujinKuechle)\
**Post date:** [August 8, 2013, 3:52am UTC](https://forum.formlabs.com/t/quick-curing/332/3 "2013-08-08T03:52:48Z")

</div>

There have been a few posts about UV curing post part rinse. They are cheaper than a resin tray. Search for UV Cure Lamp.

---

<div class="post-metadata">

**Author:** ![WendellLuncefor](https://avatars.discourse-cdn.com/v4/letter/w/7cd45c/32.png) [@WendellLuncefor](https://forum.formlabs.com/u/WendellLuncefor)\
**Post date:** [August 8, 2013, 8:34pm UTC](https://forum.formlabs.com/t/quick-curing/332/4 "2013-08-08T20:34:06Z")

</div>

Sam, as I pointed out I print at night and although the sunlight around here is often questionable I do get some. &nbsp;However, it would be nice to not have to wait 24 hours after printing to be able to assemble parts, thus the UV Light question. &nbsp;From what I’ve read on other blogs you can use a UV light, although depending on the resin the wavelength (UV-A, UB-B, etc) can vary and of course there is the question of intensity. &nbsp;One blog post I saw said they were able to cure part in under 10 minutes. &nbsp;Thus my question. &nbsp;I don’t know what the best wavelength for Formlabs resin is, they make a big deal about it being specially formulated so I’m guessing it may have different curing properties than the resins you can buy off other vendors. &nbsp;Guess a little experimentation is in order.

---

<div class="post-metadata">

**Author:** ![MarcLiyanage](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/marcliyanage/32/18086_2.png) [@MarcLiyanage](https://forum.formlabs.com/u/MarcLiyanage)\
**Post date:** [August 8, 2013, 9:21pm UTC](https://forum.formlabs.com/t/quick-curing/332/5 "2013-08-08T21:21:35Z")

</div>

I would also be very interested to hear which UV light is recommended for the Formlabs resin.

---

<div class="post-metadata">

**Author:** ![SamJ](https://avatars.discourse-cdn.com/v4/letter/s/77aa72/32.png) [@SamJ](https://forum.formlabs.com/u/SamJ)\
**Post date:** [August 8, 2013, 9:56pm UTC](https://forum.formlabs.com/t/quick-curing/332/6 "2013-08-08T21:56:07Z")

</div>

The dominant light spectrum that our CLEAR resin is responsive to is UV-A. A standard fluorescent black light, CFL, or normal tube should be fine – make sure to read whatever safety info comes with, as prolonged exposure to those bulbs has the same danger as sun-exposure without sunblock. We’ve had some good experiences with nail curing lights as well, which are similar and inexpensive.

---

<div class="post-metadata">

**Author:** ![TemujinKuechle](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/temujinkuechle/32/4941_2.png) [@TemujinKuechle](https://forum.formlabs.com/u/TemujinKuechle)\
**Post date:** [August 9, 2013, 6:42am UTC](https://forum.formlabs.com/t/quick-curing/332/7 "2013-08-09T06:42:22Z")

</div>

I read a comment in a post from not too long ago: “… 1 or 2 of these 405nm 2W SMD LED’s and hang them in my drawer: [http://www.digikey.com/scripts/dksearch/dksus.dll?vendor=0&keywords=SML-LXL8047UVC](http://www.digikey.com/scripts/dksearch/dksus.dll?vendor=0&keywords=SML-LXL8047UVC) …”
