# Prolonged print time

**URL:** <https://forum.formlabs.com/t/prolonged-print-time/34292>\
**Category:** Form 2\
**Created:** [July 1, 2022, 11:03am UTC](https://forum.formlabs.com/t/prolonged-print-time/34292 "2022-07-01T11:03:20Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rvinten](https://avatars.discourse-cdn.com/v4/letter/r/dfb087/32.png) [@Rvinten](https://forum.formlabs.com/u/Rvinten)\
**Post date:** [July 1, 2022, 11:03am UTC](https://forum.formlabs.com/t/prolonged-print-time/34292/1 "2022-07-01T11:03:20Z")

</div>

Over the past few weeks my fom2 seems to be slowing down. A small print with engagement rings would normally take 4&1/2 hours, they’re now taking 7hrs.  
The printer is accurately predicting the time. I’ts telling me it will take 7hrs.

Has anyone else experienced this?

---

<div class="post-metadata">

**Author:** ![Corey\_M](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/corey_m/32/18987_2.png) [@Corey\_M](https://forum.formlabs.com/u/Corey_M)\
**Post date:** [July 1, 2022, 1:15pm UTC](https://forum.formlabs.com/t/prolonged-print-time/34292/2 "2022-07-01T13:15:12Z")

</div>

Hi @Rvinten ,

Thanks for reaching out; do you know if you recently updated the firmware or Preform version that you were using? And if you maybe switched to a smaller layer height (which would potentially double your print time from going from 50µm to 25µm for example)? These are a couple of changes that could potentially affect how long a print would take.

If you haven’t made any of the above changes, I would advise [reaching out to our Support Team](https://support.formlabs.com/s/contact-support?language=en_US) so that they can probe further and help ensure you have the most accurate print times possible.

---

<div class="post-metadata">

**Author:** ![Rvinten](https://avatars.discourse-cdn.com/v4/letter/r/dfb087/32.png) [@Rvinten](https://forum.formlabs.com/u/Rvinten)\
**Post date:** [July 5, 2022, 8:17am UTC](https://forum.formlabs.com/t/prolonged-print-time/34292/3 "2022-07-05T08:17:30Z")

</div>

Thats it, thank you, i hadn’t noticed the resolution had changed, makes perfect sense. Thank you

---

<div class="post-metadata">

**Author:** ![Corey\_M](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/corey_m/32/18987_2.png) [@Corey\_M](https://forum.formlabs.com/u/Corey_M)\
**Post date:** [July 5, 2022, 12:38pm UTC](https://forum.formlabs.com/t/prolonged-print-time/34292/4 "2022-07-05T12:38:20Z")

</div>

Hi @Rvinten ,

I am glad to hear that everything got sorted out! Changing the resolution can definitely be worth the time investment on more complex and detailed parts, but for a lot of more simple geometries it will only add a lot of time for not too much payoff. We have some [recommendations and guidelines](https://support.formlabs.com/s/article/Adjusting-layer-thickness?language=en_US#quality) to help decide when going for speed over quality, or vice versa.
