# Prints problem

**URL:** <https://forum.formlabs.com/t/prints-problem/18325>\
**Category:** Form 1/1+\
**Created:** [April 14, 2018, 7:08am UTC](https://forum.formlabs.com/t/prints-problem/18325 "2018-04-14T07:08:07Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![japantrader](https://avatars.discourse-cdn.com/v4/letter/j/c4cdca/32.png) [@japantrader](https://forum.formlabs.com/u/japantrader)\
**Post date:** [April 14, 2018, 7:08am UTC](https://forum.formlabs.com/t/prints-problem/18325/1 "2018-04-14T07:08:07Z")

</div>

bought used 1+ trying to print with new resin from ApplyLabWork v1 black and new resin tank from formlabs

Any ideas ? Why this happened ? inside even more ugly lines

 ![IMG_0051](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/6/6b2a3892d4bfc855f0bbc0298114a120e8d4f83f.JPG) ![IMG_0050](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/9/94daa41406b3fb6a7a35b29bb946bbbeab228a7d.JPG)

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [April 29, 2018, 1:08pm UTC](https://forum.formlabs.com/t/prints-problem/18325/2 "2018-04-29T13:08:10Z")

</div>

Closed on April 29, 2018, 1:08pm UTC

This topic was automatically closed 15 days after the last reply. New replies are no longer allowed.
