# Prints Constantly Failing

**URL:** <https://forum.formlabs.com/t/prints-constantly-failing/23618>\
**Category:** Support & Troubleshooting\
**Created:** [June 6, 2019, 1:36pm UTC](https://forum.formlabs.com/t/prints-constantly-failing/23618 "2019-06-06T13:36:12Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Fractal](https://avatars.discourse-cdn.com/v4/letter/f/2bfe46/32.png) [@Fractal](https://forum.formlabs.com/u/Fractal)\
**Post date:** [June 6, 2019, 1:36pm UTC](https://forum.formlabs.com/t/prints-constantly-failing/23618/1 "2019-06-06T13:36:13Z")

</div>

Hey guys,

This is the second print I have done where this fail has occurred. We have two Form 2s at our lab, but only one of them has this issue. I don’t even know how to describe it. Its like the supports are being printed but the actual object is not.  
I have attached an image of what this failed print looks like: [https://imgur.com/a/guB1qiF](https://imgur.com/a/guB1qiF)  
Here is an image of the print file: [https://imgur.com/a/fTaGl8r](https://imgur.com/a/fTaGl8r)

Please help!!!

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [June 20, 2019, 1:36pm UTC](https://forum.formlabs.com/t/prints-constantly-failing/23618/2 "2019-06-20T13:36:18Z")

</div>

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.