# Printing together will always cure together

**URL:** <https://forum.formlabs.com/t/printing-together-will-always-cure-together/27944>\
**Category:** Form 2\
**Created:** [June 13, 2020, 2:10am UTC](https://forum.formlabs.com/t/printing-together-will-always-cure-together/27944 "2020-06-13T02:10:15Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Qee](https://avatars.discourse-cdn.com/v4/letter/q/0ea827/32.png) [@Qee](https://forum.formlabs.com/u/Qee)\
**Post date:** [June 13, 2020, 2:10am UTC](https://forum.formlabs.com/t/printing-together-will-always-cure-together/27944/1 "2020-06-13T02:10:15Z")

</div>

Why all stick together after printing.  
It is separated when placed  
Clean and gray have this problem  
I use FORM2+LT resin tank

 ![g1](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/7/5/755388994b1bd6ad4f8c6f98afc7da62927f25e4.jpg)

---

<div class="post-metadata">

**Author:** ![Dxxxx](https://avatars.discourse-cdn.com/v4/letter/d/bc8723/32.png) [@Dxxxx](https://forum.formlabs.com/u/Dxxxx)\
**Post date:** [June 13, 2020, 11:50am UTC](https://forum.formlabs.com/t/printing-together-will-always-cure-together/27944/2 "2020-06-13T11:50:04Z")

</div>

Can you publish the Form file? For both clear and grey?

---

<div class="post-metadata">

**Author:** ![Qee](https://avatars.discourse-cdn.com/v4/letter/q/0ea827/32.png) [@Qee](https://forum.formlabs.com/u/Qee)\
**Post date:** [June 14, 2020, 11:58am UTC](https://forum.formlabs.com/t/printing-together-will-always-cure-together/27944/3 "2020-06-14T11:58:08Z")

</div>

The gray one was discarded by me  
Different documents. But all the same

---

<div class="post-metadata">

**Author:** ![Dxxxx](https://avatars.discourse-cdn.com/v4/letter/d/bc8723/32.png) [@Dxxxx](https://forum.formlabs.com/u/Dxxxx)\
**Post date:** [June 14, 2020, 1:49pm UTC](https://forum.formlabs.com/t/printing-together-will-always-cure-together/27944/4 "2020-06-14T13:49:52Z")

</div>

Sorry - No preform file attached so its hard to say anything.

Just one more question - it is Formlabs Clear Version 4 resin? The supports diameter looks a little big and the print (in your picture) looks more yellow than normal??

 ![Capture](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/9/9/99e22eb72eec5b220051415a29afe5f401a4d1fe.PNG)

---

<div class="post-metadata">

**Author:** ![Qee](https://avatars.discourse-cdn.com/v4/letter/q/0ea827/32.png) [@Qee](https://forum.formlabs.com/u/Qee)\
**Post date:** [June 15, 2020, 2:09am UTC](https://forum.formlabs.com/t/printing-together-will-always-cure-together/27944/5 "2020-06-15T02:09:19Z")

</div>

Yes, mine is clear version 4  
Is a new pot of resin  
It will turn yellow after printing once  
Don’t understand the reason  
Feeling overexposed  
The printer temperature has been around 38 degrees  
This is a similar picture

 ![QQ%E6%88%AA%E5%9B%BE20200615100632](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/9/1/912592b88bfa4541e40b40f3b093d0fcde6b8958.jpg)

---

<div class="post-metadata">

**Author:** ![Dxxxx](https://avatars.discourse-cdn.com/v4/letter/d/bc8723/32.png) [@Dxxxx](https://forum.formlabs.com/u/Dxxxx)\
**Post date:** [June 15, 2020, 5:53am UTC](https://forum.formlabs.com/t/printing-together-will-always-cure-together/27944/6 "2020-06-15T05:53:01Z")

</div>

The orientation and the raft type is very different in the picture you first posted,

Its more likely to print well with the orientation and base you have arranged in the screenshot from preform - Have you tried printing it like that?

Why have you arranged the parts towards the rear edge and towards one side of the vat?