# Printing failed error

**URL:** <https://forum.formlabs.com/t/printing-failed-error/37754>\
**Category:** Form 3/3+\
**Created:** [February 13, 2024, 12:03am UTC](https://forum.formlabs.com/t/printing-failed-error/37754 "2024-02-13T00:03:04Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![dsarnaik](https://avatars.discourse-cdn.com/v4/letter/d/eada6e/32.png) [@dsarnaik](https://forum.formlabs.com/u/dsarnaik)\
**Post date:** [February 13, 2024, 12:03am UTC](https://forum.formlabs.com/t/printing-failed-error/37754/1 "2024-02-13T00:03:04Z")

</div>

To preface, I have been using this printer now for 3 years, and it has been working properly, and I use it regularly. So I removed the print from yesterday, and went to print a new part and it did not print.

The error that I got on the screen was printing failed. When I started the print, it was stuck on the preparing to print screen. Then after 5 minutes it gave me the printing failed error.

Then it said that there was an issue with the build platform which was cleaned and free of debris. I reinserted it and same issue, and then I even switched it out for a completely new build platform and it still gave me the same printing failed error.

I rebooted the system twice and the same error, tried with a different tank and resin cartridge and still and same error.

Does anyone have any suggestions.

---

<div class="post-metadata">

**Author:** ![njstroud](https://avatars.discourse-cdn.com/v4/letter/n/94ad74/32.png) [@njstroud](https://forum.formlabs.com/u/njstroud)\
**Post date:** [May 20, 2024, 12:33pm UTC](https://forum.formlabs.com/t/printing-failed-error/37754/2 "2024-05-20T12:33:30Z")

</div>

@dsarnaik , Were you able to find a solution to this problem?