# Printing a Moving Part

**URL:** <https://forum.formlabs.com/t/printing-a-moving-part/23>\
**Category:** Projects & Prints\
**Created:** [May 1, 2013, 5:39pm UTC](https://forum.formlabs.com/t/printing-a-moving-part/23 "2013-05-01T17:39:20Z")\
**Posts on this page:** 1\
**Showing post:** 14

<div class="post-metadata">

**Author:** ![AdrianKunzle](https://avatars.discourse-cdn.com/v4/letter/a/b77776/32.png) [@AdrianKunzle](https://forum.formlabs.com/u/AdrianKunzle)\
**Post date:** [December 20, 2013, 3:29am UTC](https://forum.formlabs.com/t/printing-a-moving-part/23/14 "2013-12-20T03:29:25Z")

</div>

Oh, and one final note - I have been scrubbing the finished print in the alcohol bath with a toothbrush to get the goopy layer of resin off the surface, and my surface quality has gone up considerably.

---

_[View the full topic](https://forum.formlabs.com/t/printing-a-moving-part/23)._