# Printer error code : 56

**URL:** <https://forum.formlabs.com/t/printer-error-code-56/10655>\
**Category:** Form 2\
**Created:** [November 26, 2016, 12:24am UTC](https://forum.formlabs.com/t/printer-error-code-56/10655 "2016-11-26T00:24:54Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Pacificimc](https://avatars.discourse-cdn.com/v4/letter/p/7feea3/32.png) [@Pacificimc](https://forum.formlabs.com/u/Pacificimc)\
**Post date:** [November 26, 2016, 12:24am UTC](https://forum.formlabs.com/t/printer-error-code-56/10655/1 "2016-11-26T00:24:54Z")

</div>

Hello, We had your Form 2 stopping at the end of the supports and were the part is starting to print.

We just received a ( Print error code: 56 ) ? Any Ideas ?

Thanks B

---

<div class="post-metadata">

**Author:** ![Frew](https://avatars.discourse-cdn.com/v4/letter/f/c0e974/32.png) [@Frew](https://forum.formlabs.com/u/Frew)\
**Post date:** [November 26, 2016, 1:51pm UTC](https://forum.formlabs.com/t/printer-error-code-56/10655/2 "2016-11-26T13:51:47Z")

</div>

I can’t say I’ve seen that error code before but if you [get in touch with our support team](https://tickets.formlabs.com/hc/en-us/requests/new), they’ll be happy to help troubleshoot with you. Including any errors you’re receiving and PreForm and Firmware versions in the ticket helps to speed things up a bit.

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [December 10, 2016, 1:51pm UTC](https://forum.formlabs.com/t/printer-error-code-56/10655/3 "2016-12-10T13:51:51Z")

</div>

Closed on December 10, 2016, 1:51pm UTC

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.