# Print problem Help Please

**URL:** <https://forum.formlabs.com/t/print-problem-help-please/32232>\
**Category:** General Discussion\
**Created:** [October 19, 2021, 1:26pm UTC](https://forum.formlabs.com/t/print-problem-help-please/32232 "2021-10-19T13:26:04Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![koleys](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/koleys/32/12586_2.png) [@koleys](https://forum.formlabs.com/u/koleys)\
**Post date:** [October 19, 2021, 1:26pm UTC](https://forum.formlabs.com/t/print-problem-help-please/32232/1 "2021-10-19T13:26:04Z")

</div>

What is going on with my Form 2? What’s up with the groves?. Even after changing resin tank and tray. Same thing

 ![1_20211019_080956](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/7/d/7d6033227b1a81d32b9384db5df83c4952b4036d.jpeg)

---

<div class="post-metadata">

**Author:** ![BILLUCAS](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/billucas/32/17632_2.png) [@BILLUCAS](https://forum.formlabs.com/u/BILLUCAS)\
**Post date:** [October 19, 2021, 6:04pm UTC](https://forum.formlabs.com/t/print-problem-help-please/32232/2 "2021-10-19T18:04:42Z")

</div>

You should probably do the " Cleaning the Form 2 Galvo Mirrors " process.

---

<div class="post-metadata">

**Author:** ![Randy\_Cohen](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/randy_cohen/32/1500_2.png) [@Randy\_Cohen](https://forum.formlabs.com/u/Randy_Cohen)\
**Post date:** [October 19, 2021, 10:49pm UTC](https://forum.formlabs.com/t/print-problem-help-please/32232/3 "2021-10-19T22:49:22Z")

</div>

Clean all the mirrors, as well as the glass window. The mirrors require a very specific procedure and materials. Don’t just hit them with some Windex and a paper towel or you’ll ruin the mirrors.

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [April 20, 2022, 10:50am UTC](https://forum.formlabs.com/t/print-problem-help-please/32232/4 "2022-04-20T10:50:17Z")

</div>

This topic was automatically closed 182 days after the last reply. New replies are no longer allowed.