# Print part without computer?

**URL:** <https://forum.formlabs.com/t/print-part-without-computer/576>\
**Category:** Support & Troubleshooting\
**Created:** [October 17, 2013, 11:25pm UTC](https://forum.formlabs.com/t/print-part-without-computer/576 "2013-10-17T23:25:09Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![ChrisMarsh](https://avatars.discourse-cdn.com/v4/letter/c/c4cdca/32.png) [@ChrisMarsh](https://forum.formlabs.com/u/ChrisMarsh)\
**Post date:** [October 17, 2013, 11:25pm UTC](https://forum.formlabs.com/t/print-part-without-computer/576/1 "2013-10-17T23:25:09Z")

</div>

Is it possible to tell the machine to print a second copy of the .form it just printed by only using the printer itself? &nbsp;IE load part through Pre-Form, print part, part finishes, remove from built platform, replace build platform, push button in some special way and it will start printing the same part again.

---

<div class="post-metadata">

**Author:** ![Jamie](https://avatars.discourse-cdn.com/v4/letter/j/aca169/32.png) [@Jamie](https://forum.formlabs.com/u/Jamie)\
**Post date:** [November 24, 2013, 2:06pm UTC](https://forum.formlabs.com/t/print-part-without-computer/576/2 "2013-11-24T14:06:07Z")

</div>

a “replay” function … nice idea.