# Print failed in the center of platform

**URL:** <https://forum.formlabs.com/t/print-failed-in-the-center-of-platform/9394>\
**Category:** Form 2\
**Created:** [August 25, 2016, 12:28pm UTC](https://forum.formlabs.com/t/print-failed-in-the-center-of-platform/9394 "2016-08-25T12:28:39Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![mirayo](https://avatars.discourse-cdn.com/v4/letter/m/43a26b/32.png) [@mirayo](https://forum.formlabs.com/u/mirayo)\
**Post date:** [August 25, 2016, 12:28pm UTC](https://forum.formlabs.com/t/print-failed-in-the-center-of-platform/9394/1 "2016-08-25T12:28:39Z")

</div>

Hello  
I printed 4 pieces and it only printed 2,not in the center only in the sides,but the base is print ok but don’t stick in the platform.  
please help.  
Mirayo  
[https://dl.dropboxusercontent.com/u/20631720/IMG\_20160824\_161549.jpg](https://dl.dropboxusercontent.com/u/20631720/IMG_20160824_161549.jpg)  
[https://dl.dropboxusercontent.com/u/20631720/IMG\_20160824\_162414.jpg](https://dl.dropboxusercontent.com/u/20631720/IMG_20160824_162414.jpg)

---

<div class="post-metadata">

**Author:** ![Frew](https://avatars.discourse-cdn.com/v4/letter/f/c0e974/32.png) [@Frew](https://forum.formlabs.com/u/Frew)\
**Post date:** [August 25, 2016, 1:55pm UTC](https://forum.formlabs.com/t/print-failed-in-the-center-of-platform/9394/2 "2016-08-25T13:55:23Z")

</div>

It looks like you might be using Castable V2. A few of our users have noticed that Castable V2 has a bit trickier a time sticking to the build platform than our other materials. We’re looking into the issue, and Katkramer had a good fix [in this thread.](http://forum.formlabs.com/t/castable-version-2-base-issue-possible-solution/9362) If you could also [reach out to support](http://formlabs.com/support/submitting-a-ticket/) just to notify them of the issue so we can get a better understanding of it, that’s always a big help and they might be able to provide more advice.

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [September 8, 2016, 1:55pm UTC](https://forum.formlabs.com/t/print-failed-in-the-center-of-platform/9394/3 "2016-09-08T13:55:30Z")

</div>

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.